1.5 Channel Motor Driver
www.DataSheet4U.com
M50224FP
1.5 Channel Motor Driver·with DC/DC Control
REJ03F0070-0100Z Rev.1.0 Sep.19.2003
Descript...
Description
www.DataSheet4U.com
M50224FP
1.5 Channel Motor Driver·with DC/DC Control
REJ03F0070-0100Z Rev.1.0 Sep.19.2003
Description
M50224FP is the semiconductor integrated circuit which builds in the Motor drive circuit and DC/DC circuit suitable for the camera etc. 1.5 H bridges, the DC/DC circuit of 5VDC/DC, and AE operation circuit were built in one tip by adoption of a detailed CMOS process. The reduction in power consumption and the miniaturization are considered as the high composition of the flexibility realized with one chip.
Features
Minute CMOS process acceptance.Low consumption 1.5 full swing voltage drive H Bridge circuit built-in (PWM drive correspondence) DC/DC circuit built-in of 5V One AE operation circuit built-in AE (A sensor corresponds to amorphous and SPD) Low voltage incorrect operation prevention circuit thermole shutdown circuit built-in A thermometer, with a power save function
Application
motor driver for cameras etc
Recommend Operating Condition
Supply voltage range........ VB:1.6V to 3.5V Rated supply voltage VB:3.0V
Rev.1.0, Sep.19.2003, page 1 of 9
www.DataSheet4U.com M50224FP
Pin Configuration
1 VB CA CB OUT3 OUT2 OUT1 PG BCIN PGBC VDD 10 20 VDDH DGND VA VK AEOUT SEL1 SEL2 SEL3 SML1 SML2 11
Outline : 20P2F
Block Diagram
A control input pin is the inverter input of a 100Kohm pull down. H -- it is active and functions
Circuit operation selection
SEL1 SEL2 SEL3
AE output Thermometer output
AEOUT
Motor control signal
SML1 SML2
CPU f...
Similar Datasheet