Range Amplifier. CCMM6004-SC Datasheet

CCMM6004-SC Amplifier. Datasheet pdf. Equivalent


Mimix CCMM6004-SC
www.DataSheet4U.com
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
Features
0.25 to 3.0 GHz Frequency Range
41 dBm Output IP3
2.1 dB Noise Figure
14.5 dB Gain
23.5 dBm P1dB
SOT-89 SMT Package
Single Power Supply
+3V to +5V Voltage Rail
CMM6004-SC
Functional Block Diagram
Ground
4
1 23
Input Ground Output
Bias
Circuit Description
The CMM6004-SC is a high dynamic range amplifier designed
for applications operating within the 035 to 3.0 GHz frequency
range. It is an ideal solution for transmit and receive functions
where high linearity is required.The amplifier has the flexibility
of being optimized for a number of wireless applications.The
combination of low NF and high IP3 at the same bias point
make it an ideal transmit or receive solution when used in
applications including cellular and PCS (personal
communications service) operating from 0.8 to 2.2 GHz; MMDS
(multichannel multipoint distribution systems) operating from
2.2 to 2.7 GHz; and WLAN (wireless LAN) operating at 2.4 GHz.
The CMM6004-SC is packaged in a low-cost, space efficient,
surface mount SOT-89 package which provides excellent
electrical stability and low thermal resistance. All devices are
100% RF and DC tested.
Absolute Maximum Ratings
Supply Voltage
+6.0 V
RF Input Power*
+20 dBm
Storage Temperature (Tstg)
-55 ºC to +125 ºC
Junction Temperature
150 ºC
Operating Temperature
-40 ºC to +85ºC
Thermal Resistance
52 ºC/W
Operation of this device above any of these parameters may cause damage.
*Operation with more than 10 dBm of input power may cause 2 dB
degradation in OIP3 performance.
Typical Parameters
Parameter
Typical
Units
Frequency Range 900 1900 2400 MHz
Gain
16.5 14.5 13.6
dB
Input Return Loss -18 -15 -15
dB
Output Return Loss -14 -10 -12
dB
Output IP3
+41.5 +41.0 +41.0 dBm
Output P1dB
23.8 23.5 23.0 dBm
Noise Figure
1.8 2.2 2.3
dB
1.Typical values reflect performance in recommended application circuit.
Electrical Characteristics (T=25ºC)
Unless otherwise specified,the following specifications are guaranteed at room
temperature in a Mimix fixture.
Parameter
Condition
Min Typ Max Units
Frequency Range
Gain Externally matched
Input Return Loss
Externally matched
Output IP3
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
0.3 3.0 GHz
13.5 14.5
dB
-10 dB
+38 +41
dBm
2.1 dB
23 dBm
120 150 180 mA
5.0 V
Notes:
1.T = 25ºC, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 1 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.


CCMM6004-SC Datasheet
Recommendation CCMM6004-SC Datasheet
Part CCMM6004-SC
Description High Dynamic Range Amplifier
Feature CCMM6004-SC; www.DataSheet4U.com 0.3-3.0 GHz High Dynamic Range Amplifier August 2007 - Rev 09-Aug-07 CMM6004-S.
Manufacture Mimix
Datasheet
Download CCMM6004-SC Datasheet




Mimix CCMM6004-SC
www.DataSheet4U.com
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
Typical Performance
CMM6004-SC
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 2 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.



Mimix CCMM6004-SC
www.DataSheet4U.com
0.3-3.0 GHz
High Dynamic Range Amplifier
August 2007 - Rev 09-Aug-07
Application Circuit - 900 MHz
Typical Performance (50 Ohm System)
Frequency
Gain
Input Return Loss
Output Return Loss
OIP3
Noise Figure
Drain Current
P1dB
5V
900 MHz
16.5 dB
-18.0 dB
-14.0 dB
41.0 dBm
1.8 dB
Id = 173 mA
23.8 dBm
3.3V
900 MHz
16.2 dB
-19.0 dB
-16.0 dB
38.0 dBm
1.8 dB
Id = 173 mA
18.5 dBm
20
10
0
-10
-20
-30
0.1
CMM6004-SC
S-Parameters vs Frequency
S21
S11
1.1 2.1
Frequency, GHz
S22
3.0
CMM6004-SC
RF
IN
T = 80 mil
SOT-89
T = 70 mil
C2
T = 500 mil 56 pF
RF
OUT
L1
12 nH
INPUT MATCHING
NETWORK
L2
47 nH
C1
56 pF
Vcc
5V
MIMIX
Ref Designator
C1, C2
L1
L2
Value
56 pF
12 nH
47 nH
Description
MCH185A560JK
TOKO LL1608-F12NK
TOKO LL1608-F47NK
Size
0603
0603
0603
Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099
Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com
Page 3 of 10
Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc.
Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept
their obligation to be compliant with U.S. Export Laws.







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)