MN103S33N

www.DataSheet4U.com MN103S33N Type Command ROM (× 64-bit) Data RAM (× 32-bit) Package Minimum Instruction Execution Time Interrupts MN103S33N 512 K-byte 24 K-byte MBGA360-C-1313A *Lead-free 24.3 ns (at 2.3 V to 2.7 V, 41 MHz) RESET IRQ × 15 NMI Key input Timer × 44 Input capture × 16 PWM × 8 SIF × 25 DMA × 12 WDT A/D System error 8-bit timer × 12 Reload-down count Cascade connection possible (usable as a 16-bit to 32-bit timer) 8-bit timer with PWM × 8 Reload-down count Cascade connection possible (usable as a 16-bit to 32-bit timer) PWM generating function 16-bit timer × 6 Up-down count Input capture function PWM generating function Compare/capture register 2-ch. 16-bit timer × 6 Reload-down count Watchdog timer × 1 DMA Controller Number of channels: 4 Unit of transfer: 8/16/32 bits Max. Transfer cycles: 65535 Staring factor: external interrupt, timer factor, PWM factor, serial transmission/reception factor, A/D conversion finish, software factor Transfer method: 2-bus cycle transfer Adressing modes: fixed, increment, decrement Transfer modes: word transfer, burst transfer, intermittent transfer Serial 0, 1, 3 to 8, A, B: start-stop synchronization/synchronization/I2C commonly used, 10 lines Serial 2, 9: 2 lines for start-stop synchronization only, serial 2: 10 bytes containing receive FIFO Common use Serial Interface I/O Pins Input A/D Inputs PWM ICR OCR Timer Synchronous Output ROM Collection Pl 25 4-ch. I/O 169 10-bit × 25-ch. 12-, 14-bi...