Dot Matrix LCD Controller/Driver
ST
Sitronix
ST7066U
Dot Matrix LCD Controller/Driver
Features
5 x 8 and 5 x 11 dot matrix possible Low power operatio...
Description
ST
Sitronix
ST7066U
Dot Matrix LCD Controller/Driver
Features
5 x 8 and 5 x 11 dot matrix possible Low power operation support: -- 2.7 to 5.5V Wide range of LCD driver power -- 3.0 to 10V Correspond to high speed MPU bus interface 4-bit or 8-bit MPU interface enabled 80 x 8-bit display RAM (80 characters max.) 13,200-bit character generator ROM for a total of 240 character fonts(5 x 8 dot or 5 x 11 dot) 64 x 8-bit character generator RAM -- 8 character fonts (5 x 8 dot) -- 4 character fonts (5 x 11 dot)
16-common x 40-segment liquid crystal display driver Programmable duty cycles -- 1/8 for one line of 5 x 8 dots with cursor -- 1/11 for one line of 5 x 11 dots & cursor -- 1/16 for two lines of 5 x 8 dots & cursor Wide range of instruction functions: Display clear, cursor home, display on/off, cursor on/off, display character blink, cursor shift, display shift Automatic reset circuit that initializes the controller/driver after power on Internal oscillator with external resistors Low power consumption QFP80 and Bare Chip available
Description
The ST7066U dot-matrix liquid crystal display controller and driver LSI displays alphanumeric, Japanese kana characters, and symbols. It can be configured to drive a dot-matrix liquid crystal display under the control of a 4- or 8-bit microprocessor. Since all the functions such as display RAM, character generator, and liquid crystal driver, required for driving a dot-matrix liquid crystal display are internally provided on one chip,...
Similar Datasheet