Document
www.DataSheet4U.com
Loose
Taped Fig.1 Fig.2
metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES
Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not lead to danger of electric shock. PRODUCT CODE: R46
X2 CLASS (IEC 60384-14) - MKP Series
R.46
Insulated rigid leads
Insulated flexible leads 0.5mm2
Note: R.46 series has replaced the 1.40 series and 1.47 series. For new design we suggest the use of the R.46 series.
Pitch Box thickness (B) (mm) (mm) 10.0 15.0 15.0 22.5 27.5 37.5 All <7.5 ≥7.5 All All All
Maximum dimensions (mm) B max H max L max B +0.2 B +0.2 B +0.2 B +0.2 B +0.2 B +0.3 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 H +0.1 L +0.2 L +0.3 L +0.5 L +0.3 L +0.3 L +0.3
Ø d ±0.05
p ≤15 0.6 or 0.8*
22.5 ≤ p ≤ 27.5 0.8
p = 37.5 1
*See size table. All dimensions are in mm.
GENERAL TECHNICAL DATA
Dielectric: polypropylene film. Plates: metal layer deposited by evaporation under vacuum. Winding: non-inductive type. Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Box material is solvent resistant and flame retardant according to UL94 V0. Marking: Manufacturer’s logo, series, capacitance, tolerance, rated voltage, capacitor class, dielectric code, climatic category, passive flammability category, manufacturing date code, approvals, manufacturing plant. Climatic category: 40/110/56 IEC 60068-1
test method and performance
Damp heat, steady state: Test conditions 1st
Temperature: Relative humidity (RH): Test duration:
Test conditions 2nd
+40°C ± 2°C 93% ±2% 56 days +60°C ± 2°C 95% ±2% 500 hours
Temperature: Relative humidity (RH): Test duration:
Performance
Operating temperature range: -40 to +110°C
Related documents:
IEC 60384-14, EN 60384-14.
electrical characteristics Rated voltage (VR): Capacitance range: 275Vac (50/60Hz) / 560 Vdc 300Vac (50/60Hz) / 630 Vdc 0.01µF to 10µF
Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤5% Insulation resistance: ≥50% of initial limit.
Endurance: Test conditions
Capacitance values: E6 series (IEC 60063 Norm). Capacitance tolerances (measured at 1 kHz): ±10% (K); ±20% (M); tolerance ±5% (J) available upon request Dissipation factor (DF): tgδ 10-4 at +25°C ±5°C: * Typical value Insulation resistance: Temperature: Voltage charge time: Voltage charge:
Performance ≥1x105 MΩ (5x105 MΩ )* ≥30000 s (150000 s )* Test conditions ≤10 (6)* at 1kHz
Temperature: Test duration: Voltage applied:
Performance
+110°C ± 2°C 1000 h 1.25 x VR +1000Vac 0.1 s/h
Dielectric strength: no dielectric breakdown or flashover at 4.3 x VR (d.c.)/1 min Capacitance change |∆C/C|: ≤10% Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat: Test conditions
+25°C±5°C 1 min 100 Vdc for C≤0.33µF for C>0.33µF
Solder bath temperature: +260°C ± 5°C Dipping time (with heat screen):10 s ± 1 s
Performance
Capacitance change |∆C/C|: ≤2%
Winding scheme
* Typical value
Test voltage between terminations (on all pieces): 1500Vac for 1 s + 2200Vdc for 1 s at +25°C±5°C
single sided metallized polypropylene film
05/2007
158
www.DataSheet4U.com
metallized polyPROPYLENE film capacitor SELF-HEALING PROPERTIES APPROVALS
Rated Cap. 275 Vac / 560 Vdc Std dimensions B 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.010 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.15 µF 0.15 µF 0.22 µF 0.22 µF 0.22 µF 0.33 µF 0.33 µF 0.33 µF 0.33 µF 0.33 µF 0.47 µF 0.47 µF 0.47 µF 0.56 µF 0.60 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 1.0 µF 0.47 µF 0.68 µF 1.0 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 1.5 µF 2.2 µF 2.2 µF 3.3 µF 4.7 µF 4.7 µF 6.8 µF 6.8 µF 10.0 µF 4.0 4.0 4.0 5.0 5.0 6.0 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.0 9.0 7.5 9.0 6.0 8.5 10.0 9.0 7.5 13.0 7.5 10.0 11.0 11.0 11.0 6.0 6.0 6.0 7.0 10.0 10.0 11.0 9.0 9.0 11.0 13.0 13.0 14.0 18.0 18.0 22.0 11.0 11.0 13.0 16.0 16.0 19.0 20.0 24.0 30.0 H 9.0 9.0 9.0 11.0 11.0 12.0 12.0 11.0 11.0 11.0 11.0 11.0 11.0 11.0 12.0 12.5 13.5 12.5 17.5 14.5 16.0 12.5 18.5 12.0 18.5 16.0 19.0 19.0 19.0 15.0 15.0 15.0 16.0 18.5 18.5 20.0 17.0 17.0 20.0 22.0 25.0 28.0 33.0 33.0 37.0 22.0 22.0 24.0 28.5 28.5 32.0 40.0 44.0 45.0 L 13.0 13.0 13.0 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 26.5 26.5 26.5 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 32.0 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 p 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0..