Charge Pump. YB1313 Datasheet

YB1313 Datasheet PDF, Equivalent


Part Number

YB1313

Description

Charge Pump

Manufacture

Yobon

Total Page 9 Pages
PDF Download
Download YB1313 Datasheet PDF


YB1313 Datasheet
www.DataSheet4U.com
YB1313
1x/1.5x/2x Charge Pump for White LED Application
Description
The YB1313 charge pump is designed to drive
up to 5 white LEDs with regulated constant
current in back lit display application. The
device can provide up to 25 mA per LED for a
total of more than 125 mA. The input voltage
ranges from 2.7V to 5.5V and is ideal for
applications powered by a single LI-Ion or 3 to
4 NiCd, NiMH or Alkaline batteries.
The 1MHz fix-frequency switching allows for
tiny external components, and the regulation
scheme is optimized to ensure low EMI and
low input ripple.
Internal soft-start circuitry effectively reduces
the in-rush current. YB1313 also provides short
circuit protection, over-temperature protection
and over-voltage protection. In shutdown mode,
the shutdown current is less than 1μA. YB1313
is available in a TQFN-16 3x3 package.
Features
„ Input Range : 2.7V to 5.5V
„ Drives up to 5 LEDs at 25mA Each
„ 1MHz Internal Oscillator
„ Thermal Protection Shutdown
„ Output Short-circuit Current Limit and
Over-voltage Protection
„ Under-Voltage Lockout With Hysteresis
„ Automatic Soft-Start Reduces In-Rush
Current
„ Three Charge Pump Mode1x/1.5x/2x
„ 3mm x 3mm TQFN package
Applications
„ White LED Backlighting
„ Handheld PCs and PDAs
„ Mobile Phone
Typical Application Circuit
VIN = 2.7V
To 5.5V
1 µF
0. 47 µF
0. 47 µF
VIN VOUT
C1+
D1
C1- D2
C2+
D3
YB 1313
C2- D4
EN1
D5
EN2
GND
ISET
PGND
2.2uF
YB1313 MRev.1.1
Figure 1. Typical application circuit
www.yobon.com.tw
1

YB1313 Datasheet
www.DataSheet4U.com
Pin Configuration
YB1313
1x/1.5x/2x Charge Pump for White LED Application
TQFN-16 3x3 Package
12 11 10
13
VIN
14
GND
15
EN1
16
EN2
1234
9
VOUT
8
PGND
7
D1
6
D2
5
Pin Description
Table 1
Figure 2. Pin configuration
Pin Name
Description
1 ISET Connect a RSET resistor between this pin and GND. RSET=10K, set ILED to 20 mA (Recommanded)
2 D5 Current sink output #5. If not used, connected to VIN or floating
3 D4 Current sink output #4. If not used, connected to VIN or floating
4 D3 Current sink output #3. If not used, connected to VIN or floating
5 D2 Current sink output #2. If not used, connected to VIN or floating
6 D1 Current sink output #1. If not used, connected to VIN or floating
7 PGND Power GND
8 VOUT Charge pump output
9 C2+ Flying capacitor 2 positive terminal. Connect a 0.47μF capacitor between C2+ and C2-.
10 C1+ Flying capacitor 1 positive terminal. Connect a 0.47μF capacitor between C1+ and C1-
11 C1- Flying capacitor 1 negative terminal
12 C2- Flying capacitor 2 negative terminal
13 VIN Input Voltage
14 GND Analog GND
15 EN1 Enable input1
Enable input2. EN1 and EN2 can be used for digital dimming with 4 steps from 0mA to the maximum
16 EN2
current set with ISET.
Ordering Information
Table 2
Order Number
YB1313QF33
Package Type
TQFN 3X3
Supplied as
2500 units Tape & Reel
YB1313 MRev.1.1
www.yobon.com.tw
Package Marking
1313
2


Features Datasheet pdf www.DataSheet4U.com YB1313 1x/1.5x/2x C harge Pump for White LED Application Fe atures „ Input Range : 2.7V to 5.5V „ Drives up to 5 LEDs at 25mA Each „ 1M Hz Internal Oscillator „ Thermal Prote ction Shutdown „ Output Short-circuit Current Limit and „ „ „ „ Descript ion The YB1313 charge pump is designed to drive up to 5 white LEDs with regula ted constant current in back lit displa y application. The device can provide u p to 25 mA per LED for a total of more than 125 mA. The input voltage ranges f rom 2.7V to 5.5V and is ideal for appli cations powered by a single LI-Ion or 3 to 4 NiCd, NiMH or Alkaline batteries. The 1MHz fix-frequency switching allow s for tiny external components, and the regulation scheme is optimized to ensu re low EMI and low input ripple. Intern al soft-start circuitry effectively red uces the in-rush current. YB1313 also p rovides short circuit protection, over- temperature protection and over-voltage protection. In shutdown mode, the shutdown current is less than 1μA. YB.
Keywords YB1313, datasheet, pdf, Yobon, Charge, Pump, B1313, 1313, 313, YB131, YB13, YB1, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)