Terminal Capacitors. ALS30 Datasheet

ALS30 Capacitors. Datasheet pdf. Equivalent

Part ALS30
Description (ALS30 / ALS40) Screw Terminal Capacitors
Feature 17 series Listed here are only samples of the range of Screw Terminal Capacitors we can produce. El.
Manufacture BHC
Datasheet
Download ALS30 Datasheet



ALS30
series
Listed here are only samples of the
range of Screw Terminal Capacitors
we can produce.
Electrical characteristics and case
size are just two parameters that
can be optimised by our design
engineers to achieve the exact
www.DataShpereot4dU.ucocmt you require. Please
contact our sales office for more
details.
17
ALS30/31 Series
The ALS30/31 series of screw terminal capacitors cover a
wide range of case sizes and voltage ratings featuring high
ripple currents and long life performance. They are ideally
suited for industrial and commercial applications demanding
high reliability and long life expectancy such as frequency
converters, UPS systems and switch mode power supplies.
ALS40/41 Series
The ALS40/41 series of screw terminal capacitors feature the
same high ripple currents and long life characteristics as the
ALS30/31 series but can operate at higher temperatures.
They are similarly suited for high reliability and long life
applications such as frequency converters, UPS systems and
switch mode power supplies, but the extended temperature
range allows increased ripple currents at lower
temperatures.
Capacitance
Range
Capacitance
Tolerance
Voltage
Range
Temperature
range
Case sizes
ALS30/31
68µF to
1,500,000µF
±20%
10V to
600V d.c.
-40°C to
+85°C
36 x 52mm to
91 x 220mm
ALS40/41
100µF to
1,500,000µF
±20%
10V to
500V d.c.
-40°C to
+105°C
36 x 52mm to
91 x 220mm



ALS30
18
case sizes
CASE DIMENSIONS AND TERMINAL STYLES
Terminations
Aluminium inserts with M5 threads as standard, max. torque
2NM. Optional M6 threaded inserts have a max. torque 4NM.
Max. torque for stud mounting M8:4NM and M12:8NM
.Terminal options
(preferred options shown in bold)
www.DataSheet4U.com
Term. Thread
Style
A 1 M5
A 2 M5
Height
T - mm
±0.5
5.5
7.14
Dia. - DT Thread depth
mm TD - mm
±0.5 minimum
13 10
8 10
Drawing
Fig.2
Fig.1
B M5 7.14
13
10 Fig.1
C M6
5.5
13
10 Fig.1
F M5 2.36
8
5.5 Fig.1
G M6 6.35
17
11.8 Fig.1
J M6 3.17
17
8.8 Fig.1
M M5
R 3 M5
7.14
5.5
8
15
10 Fig.1
10 Fig. 2
Notes: 1 Terminal post with flats.
Can diameters 51, 66, 77, 91mm.
Dimension Z is 10mm.
2 Can diameter 36mm only.
3 Terminal post with flats.
Dimension Z is 13mm.
Mounting
Any position but refer to the earlier section ‘Application &
Operation’. Details of mounting clips and stud mounting
kits can be found near the back of the catalogue.
Fig. 1 - Terminal Styles A2, B, C, F, G, J, M
S Safety Vent
V
TD
Fig. 2 - Terminal Style A1, R
S
DT
“+” SIGN
Safety Vent
V
TD
ALS30/40
DT
“+” SIGN
Z
S
Lt L
T (measured
from deck
surface)
ALS31/41
Stud Mounting - ALS31/41
Case Polarity - due to the presence of electrolyte in the
capacitor the aluminium can and stud mounting will
essentially be at the same potential as the negative termi-
nal. BHC therefore recommends that the stud and can are
insulated (see accessories for insulating nuts).
H
ØD
M Insulating Disk





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)