30Amps. ATH30 Datasheet

ATH30 30Amps. Datasheet pdf. Equivalent

Part ATH30
Description 30Amps
Feature 30Amps ATH30 Total Power: Input Voltages: No. of Outputs: 143W 3.3V, 5V, 12V Single Electrical Sp.
Manufacture Astec
Datasheet
Download ATH30 Datasheet



ATH30
30Amps
ATH30
Total Power:
Input Voltages:
No. of Outputs:
143W
3.3V, 5V, 12V
Single
www.DataSheet4U.com
Special Features
• Point-of-Load Alliance product
• Open frame TH or SMT termination
• Auto-Track™ Sequencing
• Margin Up/Down Controls
• Remote sense compensation
• Output Voltage Adjust (Resistor Programming)
• Under Voltage Lockout
• Pre-Biased start-up
• Output On/Off Inhibit
• -40°C to +85°C Ambient Air Operation
• Non Isolated module
Environmental
Ambient air operating temperature range:
-40°C to +85°C
Storage temperature: -40°C to +125°C
Demonstrated MTBF: 3.9M Hrs
Electrical Specs
Input
Input Range
3.0 - 3.6V
4.5 - 5.5V
10.8 - 13.2V
Under Voltage Lockout with hysterisis
Efficiency
up to 94%
Output
Overall Regulation
Noise/Ripple
Remote sense
Transient Response
Over Current Protection
1% of Vo Typ
40mV Typ (2.5Vo and below)
1% Vo Typ (Vo > 2.5V)
Up to 300mV max
100mV typical for 3.3Vo
for 50% to 100% IO,MAX step change
70us recovery time (Co = 330uF)
155% IO,MAX typical (autorecovery)
Control
Inhibit Control
Output Voltage Adjust
Output Margin
Output Auto-Track™
Negative Logic
(OPEN = Normal Operation)
(GROUND = Function Active)
See output range on page 2
±5% VO,NOM
(See Note 5)
Specifications subject to change without notice
Safety
UL, cUL 60950 Recognition
EN 60950 though TUV or VDE (Pending)
2 North America (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211Asia (HK): 852-2437-9662



ATH30
AMERICAS
5810 Van Allen Way
Carlsbad, CA 92008
Telephone: 760-930-4600
Facsimile: 760-930-0698
EUROPE
Astec House, Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX, UK
Telephone: 44 (1384) 842-211
Facsimile: 44 (1384) 843-355
ASIA
Units 2111-2116, Level 21
Tower1, Metroplaza
223, Hing Fong Road
Fwai Fong, New Territories
Hong Kong
Telephone: 852-2437-9662
Facsimile: 852-2402-4426
Ordering Information
Input
Voltage
Output
Voltage
Output2
Current
3.0V to 3.6V
4.5V to 5.5V
10.8V to 13.2V
0.8V to 2.5V
0.8V to 3.6V
1.2V to 5.5V
30A
30A
26A
OPTIONS:
www.DataSheet4U.com “-9J” - Output Trim, TH termination, Tray Packaging
“-9SJ” - Output Trim, SMT termination, Tray Packaging
Efficiency3
93%
94%
94%
Model Number
ATH30T033- 9(S)(J)
ATH30T05 - 9(S)(J)
ATH26K12 - 9(S)(J)
Pin Assignments
Single Output
PINS
GND
: 1, 3
Vin : 2
Inhibit
:4
Vo Adjust
:5
Vo Sense
:6
Vout
: 8, 9
GND
: 7, 10
Track
: 11
Margin Down : 12
Margin Up : 13
Notes:
1. Nominal values apply with sense pins
connected to +Vout and Ground Return
with other control pins unconnected.
2. Output derating applies at elevated
ambient temperature.
3. Typical efficiency taken at 20A load, 2.5V
output (3.3Vin device); 20A load, 3.3V
output (5Vin device); 18A load, 5V output
(12Vin device).
4. Mechanical Dimensions are nominal values.
5. Consult the technical reference notes when
available.
6. Auto-Track™ is a trademark of Texas
Instruments.
7. Specification subject to change without
notice.
Astec reserves the right to make changes to the information
contained herein without notice and assumes no liability as a
result of its use or application. (REV02: OCTOBER 21, 2004)
Through-hole and SMT Outline [in (mm)]
www.astecpower.com
3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)