www.DataSheet4U.com
LCD MODULE
Article No.:
AC-404AYILY-73
40 x 4 Characters STN yellowgreen Technology with yellowgreen led backlight
Gleichmann & Co. Electronics GmbH Industriestr. 16 76297 Stutensee Germany Tel.: +49 (07249) 910-151 Fax: +49 (07249) 910-559 Email:
[email protected] Internet: www.msc-ge.com
A MP I R E
SPECIFICATIONS FOR LCD MODULE
www.DataSheet4U.com
CUSTOMER CUSTOMER PART NO. AMPIRE PART NO. APPROVED BY DATE AC-404AYILY-73
APPROVED BY
CHECKED BY
ORGANIZED BY
DATE : 2003/12/25
AMPIRE CO., LTD.
1
RECORD OF REVISION
Revision Date 2002/7/26 2003/12/25 Page 3 New Release Change the IC to ST7066U Patrick Contents Editor
www.DataSheet4U.com
DATE : 2003/12/25
AMPIRE CO., LTD.
2
1
FEATURES
(1) Display format : 40 characters × 4 lines (2) Construction : LCD, Black Bezel, Yellow-green LED back-light and PCB. (3) Display type : STN , Yellow-green mode ,Transflective , 6 o'clock view. (4) Controller : ST0066U. (5) 5V single power input. (6) www.DataSheet4U.com Normal temperature type.
(7) Excellent LC : VOP maintains at 5V for whole temp. range, no need extra temp. compensation circuit.
2
MECHANICAL DATA
Parameter Dot size Dot pitch Character size Viewing area Module size (LED back-light) Stand Value 0.50(W) × 0.55(H) 0.57(W) × 0.62(H) 2.78(W) × 4.89(H) 147.0(W) × 29.5(H) 190.0(W) × 54.0(H) × 14.0 max (T) Unit mm mm mm mm mm
3
ABSOLUTE MAXIMUM RATINGS
Parameter Logic Circuit Supply Voltage LCD Driving Voltage Input Voltage Symbol VDD-VSS VDD-VO VI TOP TSTG Min -0.3 -0.3 -0.3 0 -20 Max 7.0 10.0 VDD+0.3 50 70 Unit V V V °C °C
Normal temp. type
Operating Temp. Storage Temp.
DATE : 2003/12/25
AMPIRE CO., LTD.
3
4
ELECTRO-OPTICAL CHARACTERISTICS
Parameter Logic Circuit Supply Voltage LCD Driving Voltage Symbol VDD-VSS VDD-VO Condition -0 °C 25 °C 50 °C VIH VIL Logic Supply Current Contrast Rise Time Fall Time Viewing Angle Range IDD --VDD = 5V Min 4.5 4.75 4.75 4.75 0.7 VDD VSS -Typ 5.0 5.0 5.0 5.0 --3.0 Max 5.5 5.25 5.25 5.25 VDD 0.3 VDD 4.0 V V mA Unit V V 0 ~ 50 °C for Normal Temp. type Note
----- Electronic Characteristics -----
www.DataSheet4U.com
Input Voltage
----- Optical Characteristics ----CR tr tf θf θb θl θr Frame Frequency Forward Voltage Forward Current fF VF IF 25°C -VF=4.1V IF=600mA 25°C 25°C 25°C 25°C & CR≥2 -----------5 150 150 40 30 35 35 64 4.1 600 30
A
-200 200 -----4.3 --Hz V mA cd/m2 Deg. ms ms
Note 1 Note 2 Note 3
----- LED Back-light Characteristics ----Supply Voltage between A&K
LCM Luminous intensity
* LED Dice number = 2× =120
K
DATE : 2003/12/25
AMPIRE CO., LTD.
4
(NOTE 1) Contrast ratio : CR = (Brightness in OFF state) / (Brightness in ON state) ( NOTE 2 ) Response time :
www.DataSheet4U.com
(NOTE 3) Viewing angle
DATE : 2003/12/25
AMPIRE CO., LTD.
5
5
BLOCK DIAGRAM & INTERFACE
D0 D7 RS R/W VDD VO VSS E1
www.DataSheet4U.com
CONTROL LSI(1)
4 SEG 40 COM 16
DRIVER * 2
SEG 160
LCD
CONTROL LSI(2) E2
COM 16
SEG 40
SEG 160
4
DRIVER * 2
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Symbol DB7 DB6 DB5 DB4 DB3 DB2 DB1 DB0 E1 R/W RS VO VSS VDD E2 NC Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Data Bus Enable Signal Read/Write Select
Function
Data/Instruction Select Contrast Adjustment Ground (0V) Supply Voltage for Logic (+5V) Enable Signal (no pull-up resistor) No connection
DATE : 2003/12/25
AMPIRE CO., LTD.
6
6
POWER SUPPLY
VDD(+5V)
LCD Bias Circuit VO
R1 VR
LCD Module
www.DataSheet4U.com
R2 VSS
5V Power Input
600mA 4.1V + LEDA LED back-light LEDK
DATE : 2003/12/25
AMPIRE CO., LTD.
7
7
TIMING CHARACTERISTICS
Write Operation
www.DataSheet4U.com
Item Enable cycle time Enable pulse width (high level) Enable rise/fall time Address set-up time (RS, R/W to E) Address hold time Data set-up time Data hold time
Symbol tcycE PWEH tEr,tEf tAS tAH tDSW tH
Min 1200 140 0 10 40 10
Typ -
Max 25 -
Unit ns
DATE : 2003/12/25
AMPIRE CO., LTD.
8
Read Operation
www.DataSheet4U.com
Item Enable cycle time Enable pulse width (high level) Enable rise/fall time Address set-up time (RS, R/W to E) Address hold time Data delay time Data hold time
Symbol tcycE PWEH tEr,tEf tAS tAH tDDR tDRH
Min 1200 140 0 10 -10
Typ -
Max 25 100 -
Unit ns
DATE : 2003/12/25
AMPIRE CO., LTD.
9
8
DD RAM ADDRESS
1 00 40 00 40 2 01 41 01 41 3 02 42 02 42 … … … … … 38 25 65 25 65 39 26 66 26 66 40 27 67 27 67
CHAR. LINE 1 LINE 2 LINE 3 LINE 4
www.DataSheet4U.com
DATE : 2003/12/25
AMPIRE CO., LTD.
10
9
FONT TABLE
www.DataSheet4U.com
DATE : 2003/12/25
AMPIRE CO., LTD.
11
10 QUALITY AND RELIABILITY 10.1 TEST CONDITIONS
Tests should be conducted under the following conditions : Ambient temperature : 25 ± 5°C Humidity : 60 ± 25% RH.
10.2 SAMPLING PLAN
www.DataSheet4U.com
Sampling method shall be in accordance with MIL-STD-105E, inspection level II, normal inspection, and single sampling plan tables for normal, tightened, and reduced inspection.
10.3 ACCEPTABLE QUALITY LEVEL
A major defect is defined as o.