Tx Filter. ACPF-7001 Datasheet

ACPF-7001 Filter. Datasheet pdf. Equivalent

ACPF-7001 Datasheet
Recommendation ACPF-7001 Datasheet
Part ACPF-7001
Description High Rejection Tx Filter
Feature ACPF-7001; Agilent ACPF-7001 High Rejection Tx Filter for US PCS Band Data Sheet Features • High rejection fro.
Manufacture Agilent
Datasheet
Download ACPF-7001 Datasheet





Agilent ACPF-7001
Agilent ACPF-7001
High Rejection Tx Filter
for US PCS Band
Data Sheet
www.DataSheet4U.com
Description
This product is a high rejection
full band transmit filter designed
for US PCS handsets. Its perfor-
mance rivals splitband surface
acoustic wave (SAW) transmit
filters. Since the rejection is
provided by a single filter, no
switches are required, saving
board space and external compo-
nents, eliminating switch loss,
and reducing programming
complexity.
In typical cellular phone archi-
tectures, the transmit filter fits
between the driver amplifier and
the power amplifier. This filter
reduces the noise in the Rx band
being amplified by the transmit
chain, enhancing receiver sensi-
tivity. High rejection keeps
unwanted signals out of the
receive path.
Package
1
2
89
76
4: Input
8: Output
1, 2, 3, 5, 6, 7, 9: Grounded
Center pad grounded
See Figure 10 for details.
"x" = date code character
Agilent’s thin-Film Bulk Acoustic
Resonator (FBAR) technology
makes possible high-Q filters at a
fraction of their usual size.
3
4
5
Features
• High rejection from a single filter
with no switches required
• Passband: 1850 –1910 MHz
33 dB min Attenuation,
1930 – 1990 MHz
3.5 dB max Insertion Loss
• Space saving solution
Small footprint: 3 x 3-mm solution
Low profile package:
1.0 mm high (typ)
1.15 mm (max)
Applications
• US PCS band handsets
• Wireless data terminals



Agilent ACPF-7001
Electrical Specifications, ZO = 50
Symbol
f
IL
IL
IL
S21
S21
S21
S21
www.DataSheet4U.com
S21
S11, S22
Pin max
Parameter
Passband
Insertion Loss 1850-1855 MHz
Insertion Loss 1855-1905 MHz
Insertion Loss 1905-1910 MHz
Ripple, 1850-1910 MHz
Min Rejection, 1930-1990 MHz
Min Rejection, 10-1800 MHz
Min Rejection, 1990-3820 MHz
Min Rejection, 3820-5730 MHz
In-band Return Loss
Safe Input Power Level
Units
MHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
dBm
25°C
Min Typ Max
1850
2.0
1.5
2.5
33 37
25
30
15
9.0 11
20
1910
3.5
3.0
3.5
2.5
-30° to +25°C
Min Typ Max
1850 1910
3.7
3.0
3.2
33
9.0 11
20
25° to +70°C
Min Typ Max
1850 1910
3.2
3.0
3.7
33
9.0 11
20
Absolute Maximum Ratings[2]
Parameter
Operating Temperature[1]
Storage Temperature[1]
Unit
°C
°C
Value
–30 to +85
-30 to +100
Typical Performance, 25°C, ZO = 50
0
0
-10 -1
-20 -2
-30 -3
-40 -4
-50
1.7
1.80 1.90 2.00
FREQUENCY (GHz)
Figure 1. Attenuation vs. Frequency.
2.10
0
-5
1.83 1.85 1.87 1.89 1.91 1.93
FREQUENCY (GHz)
Figure 2. Insertion Loss vs. Frequency.
0
-10 -4
-20 -8
-30 -12
-40 -16
-50
0
1.0 2.0 3.0 4.0
FREQUENCY (GHz)
5.0
Figure 3. Attenuation vs. Frequency
(Broadband).
2
6.0
-20
1.83
1.85 1.87 1.89 1.91
FREQUENCY (GHz)
Figure 4. Return Loss vs. Frequency.
1.93
Notes:
1. Temperature is defined at case TC, the
temperature of the underside of the filter
where it makes contact with the circuit board.
2. Specifications are guaranteed over the given
temperature range. Operation in excess of
any one of these conditions may result in
permanent damage to the device.



Agilent ACPF-7001
PCB Interface and
Mounting Instructions
Mounting Consideration and
Board Description
The ACPF-7001 filter has one
input (Pin 4), one output (Pin 8)
and 6 grounds (Pins 1, 2, 3, 5, 6,
7). Furthermore, the inside of the
filter (center pad Pin 9) is
ground-plane; therefore it must
be soldered to PCB ground.
In summary:
Pins 1, 2, 3, 5, 6, 7, 9 are
www.DataSheet4U.cogmrounded. (Figure 5)
Demo board uses 10 mil top,
18 mil bottom Greek Coplanar
Waveguide Over Ground plane
(CPWG) style board. (See
board layer Figure 5, 6)
Note: For best performance, try
to reproduce this board stack up
closely. The demoboard uses
CPWG transmission lines for high
isolation between two ports. It
uses via holes to connect the
CPWG line from the underside of
the board to the filter mounting
pads on top. If Ground-Signal-
Ground (GSG) type board is
used, better return loss can be
achieved since it eliminates
connector mismatch.
Demo Boards
SMA connectorized Demo boards
are available for sampling. (See
board drawing in Figure 5).
Figure 5. PCB top and bottom views (vias used to connect the underside of the board to the filter
mounting pads on top).
3
Ground
2
Ground
1
Ground
1.55 SQ
4
Input
9
Ground
0.1
8
Output
0.6 0.28
0.28
56
Ground 0.1 Ground
7
Ground
0.7
1.3
0.7
Figure 6a. PCB footprint dimensions, pad nomenclature, stencil dimensions (mm).
Figure 6b. Board stack up description.
3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)