RAPPROVAL SHEET Customer : www.DataSheet4U.com KUK JAE TELE PARTS CO., LTD. Description: D-SUB Socket High Density Right Angle Type Part No.: : Part No.: : Date : Rev. : 5510-XXS-XX-XX-F1 MAY-02-2008 A (Evaluted) (Checked) (Approval) (Approval) Yang xia Jeremy Liu Mike Wu UL:Recognized NO. E 144392 Head Office 184 2 2F, 184, Chang –Teh Road, Sec. 4, Shih-Lin, Taipei, Taiwan, R.O.C. TEL:886-2-28802631( 10 Lines ) FAX:886-2-28802710 ·28802888 http://www.neltron.com.tw E-mail : neltron@neltron.com.tw China Factory Science Service Plaza ,1,Hengtian Second Road , Tangxia Town Dongguan City .Guangdong Province ,China Bill of Approval Sheet www.DataSheet4U.com Product Description: D-SUB Socket High Density Right Angle Type Product Part NO.: Index 1 2 3 4~6 7 Cover Bill of Approval Sheet Customer drawing Product specification Plastic 5510-XXS-XX-XX-F1 Item ate: MAY-02-2008 8~12 Plastic SGS 13 Terminal 14~16 Terminal SGS 17 Shell Material 18~20 Shell SGS 21~22 Plating 23~31 Plating SGS 32~35 UL Card www.DataSheet4U.com PRODUCT SPECIFICATION 1.Scope This specification covers D-SUB Socket High Density Right Angle Type 2.Product name and part number Product Name D-SUB Socket High Density Right Angle Type Part Number 5510-XXS-XX-XX-F1 3.Material/Finish Name www.DataSheet4U.com Material PBT (UL94V-0) Phosphor Bronze Metal Iron Finish Color Plastic Terminal Shell Selective Gold Plated Tin Plated *Refer to the drawing. 4.Rating Item Rated Voltage (MAX.) Rated Current (MAX.) Ambient Temperature Range 250 V 3.0 A -40℃~+85℃ Standard AC/DC *1: Including terminal temperature rise. 5. Performance 5-1.Electrical Performance Item Contact Resistance Test Condition Mate connectors D-SUB Socket High Density Right Angle Type and measure by dry circuit, 20mVMAX.10mA. (JIS C5402 5.4) Mate connectors D-SUB Socket High Density Right 5-1-2 Insulation Resistance Angle Type and apply 1000V DC between adjacent terminal or ground. (JIS C5402 5.2/MIL-STD-202 Method 302) Mate connectors D-SUB Socket High Density Right 5-1-3 Dielectric Strength Angle Type and apply 1000V AC (rms) for 1 minute between adjacent terminal or ground. (JIS C5402 5.1/MIL-STD-202 Method 301) No Breakdown 5000MΩ MIN 30mΩ MAX Requirement 5-1-1 5-2 Mechanical Performance Item 5-2-1 Insertion and Withdrawal Test Condition Insert and withdraw connectors at the speed rate of 25±3mm/minute. Insertion Force Requirement Kgf/Pin(Max) Force Withdrawal Force Kgf/Pin(Min) 5-2-2 Terminal Apply axial pull out force at the speed rate of Retention Force 25±3mm per minute. kgf MIN 5-3. Environmental Performance and Others Item 5-3-1 www.DataSheet4U.com Test Condition Repeated Insertion and Withdrawal Temperature Rise When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute. Carrying rated current load. (UL 498) Amplitude:1.5mm P-P Sweep time:10-55-10 Hz In 1 minute Duration: 2 hours in each of X.Y .Z .axes (MIL-STD-202 Method 201) Requirement Contact Resistance Temperature rise Appearance Contact Resistance Discontinuity 30 mΩ MAX 20 ℃ MAX No Damage 30 mΩ MAX 1μsec. MAX . No Damage 30 mΩ MAX 1μsec. MAX. No Damage 30mΩ MAX No Damage 20 mΩ MAX No Damage 30 mΩ MAX Must meet 4-1-3 5000MΩ MIN No Damage 30 mΩ MAX No Damage 20mΩ MAX No Damage 30 mΩ MAX No Damage 30mΩ MAX 5-3-2 5-3-3 Vibration 5-3-4 Shock 490m/S2 (50G),3 strokes in each X, Y, Appearance Z axes. Contact (JIS C0041/MIL-STD-202 Method Resistance 213) Discontinuity 85±2℃ 48hours (JIS C0021/MIL-STD-202 Method 108) -40±3℃ 48 hours (JIS C0020) Temperature: 60±2℃ Relative Humidity:90~95% Duration: 96hours Appearance Contact Resistance Appearance Contact Resistance Appearance Contact Resistance Dielectric Strength Insulation Resistance Appearance Contact Resistance Appearance Contact Resistance Appearance Contact Resistance Appearance Contact Resistance 5-3-5 Heat Resistance Cold Resistance 5-3-6 5-3-7 Humidity (JIS C0022/MIL-STD-202 Method 103) 5 cycles of: a)-55℃ 30 minutes b)+105℃ 30 minutes (JIS C0025) 12±4 hours exposure to a salt spray from the 5±1% solution at 35±2℃ (JIS C0023/MIL-STD-202 Method 101) 24 hours exposure to 50±5ppm. SO2 gas at 40±2℃ 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution 5-3-8 Temperature Cycling 5-3-9 Salt Spray 5-3-10 SO2 Gas 5-3-11 NH3 Gas 5-3-12 5-3-13 5-3-14 Solderability Solder Time:5±0.5 sec. Solder Temperature:220±5℃ Solder Wetting Appearance 95% of immersed area must show no voids, pin holes No Damage Supplier to provide measured data into the Table 1. Resistance Soldering Time:5±0.5 sec. To Soldering Heat Solder Temperature:220±5℃ Soldering Profile 5-3-14-1 soldering 5-3-14-2Wave Soldering Manual Solder temp: 400±5°C Time: 5± 0.5 sec Soldering temp : 220 ± 5°C Soldering time : 5 ± 0.5 s www.DataSheet4U.com Preheating : 150 ± 10°C for 1 to 2 min. www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com 16 Au/Ni/Brass (U")07/11 STD d Coll. 2 ˔˵̆ˁʳʳ 1 THICKNESS MEASUREMENT MEAN TOP COAT STD, DEVIATION NO. OF MEAS. MEAN INT COAT STD, DEVIATION NO. OF MEAS. T meas LOCATE SPECIMEN TO MEASURE Xt1=0.009 ː ː ː 1.06u" 0.176u" ˄˃ ː 54.321u" ː 3.454u" ː ˄˃ ː 10 s PRESS Xn= " GO " ˃ˁ˃ˊˌ N= N= N= N= N= ˄ ˅ ˆ ˇ ˈ Au THICKNESS=1.08u" THICKNESS=1.01u" THICKNESS=1.05u" THICKNESS=1.06u" THICKNESS=1.04u" ː ː ː ː ː Ni 52.59u" 54.39u" 53.54u" 55.96u" 53.12u" ˅˃˃ˉ˂˄˃˂˄ˆ www.DataSheet4U.com 16 Tin/Ni/P-Bronze (U")7/8 STD d Coll. 2 ˔˵̆ˁʳʳ 1 THICKNESS MEASUREMENT MEAN TOP COAT STD, DEVIATION NO. OF MEAS. MEAN TOP COAT STD, DEVIATION NO. OF MEAS. T meas LOCATE SPECIMEN TO MEASURE Xt1= ː 50.321u" ː 3.454u" ː ˄˃ ː 100.08u" ː 6.363u" ː ˄˃ ː 10 s PRESS Xn= " GO " N= N= N= N= N= ˄ ˅ ˆ ˇ ˈ ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˧˼́ THICKNESS=100.03u" THICKNESS=100.07u" THICKNESS=100.04u" THICKNESS=100.05u" ː ː ː ː ˡ˼ 50.51u" 50.10u" 50.24u" 50.37u" THICKNESS=100.09u" ː 50.15u" 2006/12/13 www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com www.DataSheet4U.com OCD Home Quick Guide Contact Us UL. com Page Bottom C o n n e c t o r s f o r U s e i n D a t a , S i g n a www.DataSheet4U.com See General Information for Connectors for Use in Data, Signal, Control and Power Applications - Component NELTRON INDUSTRIAL CO LTD 2ND FL 184 CHENG-TEH RD, SEC 4 SHIH-LIN, TAIPEI 111 TAIWAN E144392 Wire to board connectors, Cat. Nos. 1310, 1311, 5289H followed by -02 thru -15; Cat. Nos. 8982H, 8980H, 8981H followed by 04; Cat. Nos. 2317RB, 2317RJ, 2317SB, 2317SJ, 2318HB, 2318HJ, 2417RJ, 2417SJ, 2418HJ followed by -02 thru -15; Cat. No. 2226A followed by -01 thru -40; Cat. No. 2226B followed by -02 thru -80; Cat. No. 2221 followed by -06, -12; Cat. No. 2222 followed by -06; Cat. No. 2220 followed by -02 thru -16; Cat. Nos. 2217R, 2217S, 2219R, 2219S followed by -02 thru -15; Cat. No. 2218H followed by -01 thru -15; Cat. No. 2026A followed by -01 thru -40; Cat. No. 2026B followed by -02 thru -80; Cat. No. 4400 followed by -44; Cat. No. 4401 followed by -10, -14, -16, -20, -24, -26, -30, -34, -40, -50, -60, -64; Cat. No. 4402 followed by -10, -14, -16, 20, -26, -34, -40, -44, -50, -60, -64; Cat. No. 4403 followed by -10, -14, -16, -20, -26, -30, -34, -40, -50, -60; Cat. No. 4404 followed by -14, -16, -18, -20; Cat. No. 4405 followed by -10, -14, -16, -20, -26; Cat. No. 4406 followed by -10, -14, -16, -20, -24, 26, -30, -34, -40, -50, -60, -64; Cat. No. 4501 followed by -20, -26, -32, -34, -40, -50, -52, -60, -68, -80, -100; Cat. No. 1200 followed by -03 thru -09; Cat. No. 1005 followed by -50, -100. P.C.B connectors, Cat. No. 2162 followed by -16, -18, -20, -24; Cat. No. 2227 followed by -08, -14, -16, -18, -20, -24, -28, -40; Cat. No. 6605 followed by -72; Cat. No. 6602 followed by -30, -60; Cat. Nos. 1007, 1008 followed by -14, -20, -26, -30, -40, -50, 60, -68, -80, -100; Cat. No. 6601 followed by -20, -28, -32, -44, -52, -68, -84; Cat. No. 6603 followed by -68, -84, -85, -114, -121, 132; Cat. No. 1201 followed by -03 thru -08; Cat. No. 1202 followed by -05; Cat. No. 2416S followed by -20, -26, -32, -34, -40, -50, -52, -60, -68, -80, -100; Cat. Nos. 2216R, 2216S followed by -10, -12, -14, -16, -20, -24, -26, -30, -34, -40, -50, -56, -60, -64; Cat. Nos. 2516R, 2516S followed by -20, -26, -32, -34, -40, -50, -52, -60, -68, -80, -100; Cat. Nos. 2223R, 2223S followed by -02 thru -21; Cat. No. 2323S followed by -02 thru -20; Cat. No. 2316S followed by -10, -14, -16, -20, -26, -30, -34, -40, -50, -60, -64; Cat. No. 2525 followed by -10, -12, -20, -30, -40, -50, -60, -80, -100, -120; Cat. No. 2314S followed by -20, -26, -32, -34, -40, -50, -52, -60, -68, -80, -100; Cat. No. 2224 followed by -02 thru -15; Cat. Nos. 2211R, 2211S followed by -01 thru -40. Cat. Nos. 2213R, 2213S followed by -02 thru -80; Cat. No. 2212S followed by -02 thru -40; Cat. No. 2214S followed by -02 thru -80; Cat. Nos. 2215R, 2215S followed by -10, -12, -16, -18, -20, -26, -30, -34, -40, -50, -60; Cat. No. 2225 followed by -36, -44, -50, 62, -80, -86, -100; Cat. No. 2207S followed by -02 thru -80; Cat. Nos. 2208R, 2208S followed by -02 thru -80; Cat. No. 2209S followed by -01 thru -40; Cat. Nos. 2210R, 2210S followed by -01 thru -40; Cat. No. 2206S followed by -01 thru -30; Cat. No. 41612 followed by -32, -48, -64, -96. 5510-xxS-xx-xx-F1 Type Datasheet pdf - Angle Type. Equivalent, Catalog

Angle Type. 5510-xxS-xx-xx-F1 Datasheet

5510-xxS-xx-xx-F1 Type. Datasheet pdf. Equivalent

5510-xxS-xx-xx-F1 Datasheet
Recommendation 5510-xxS-xx-xx-F1 Datasheet
Part 5510-xxS-xx-xx-F1
Description D-Sub Socket High Density Right Angle Type
Feature 5510-xxS-xx-xx-F1; RAPPROVAL SHEET Customer : www.DataSheet4U.com KUK JAE TELE PARTS CO., LTD. Description: D-SUB.
Manufacture Neltron
Datasheet
Download 5510-xxS-xx-xx-F1 Datasheet





Neltron 5510-xxS-xx-xx-F1
RAPPROVAL SHEET
承認書
Customer
客戶名稱:
KUK JAE TELE PARTS CO., LTD.
www.DataSheet4U.com Description:
產品描述 D-SUB Socket High Density Right Angle Type
Part No.:
客戶編號:
Part No.:
繼德編號:
Date 日 期:
Rev. 版 次:
5510-XXS-XX-XX-F1
MAY-02-2008
A
經辦(Evaluted) 審核(Checked) 核準(Approval) 客戶承認(Approval)
Yang xia Jeremy Liu Mike Wu
UL:Recognized NO. E 144392
Head Office
臺北市士林區承德路四段 184 2
2F, 184, Chang –Teh Road, Sec. 4, Shih-Lin, Taipei, Taiwan, R.O.C.
TEL:886-2-28802631( 10 Lines ) FAX:886-2-28802710 ·28802888
http://www.neltron.com.tw E-mail : neltron@neltron.com.tw
China Factory
中國廣東省東莞市塘廈鎮科苑城橫田二路一號
Science Service Plaza ,1,Hengtian Second Road ,
Tangxia Town Dongguan City .Guangdong Province ,China



Neltron 5510-xxS-xx-xx-F1
Bill of Approval Sheet
www.DataShPeetr4oU.dcoumct Description: D-SUB Socket High Density Right Angle Type
Product Part NO.: 5510-XXS-XX-XX-F1
ate: MAY-02-2008
Index
1 Cover
2 Bill of Approval Sheet
3 Customer drawing
4~6 Product specification
7 Plastic
8~12 Plastic SGS
13 Terminal
14~16 Terminal SGS
17 Shell Material
18~20 Shell SGS
21~22 Plating
23~31 Plating SGS
32~35 UL Card
Item



Neltron 5510-xxS-xx-xx-F1





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)