28/40/44-Pin Flash Microcontroller
PIC18F2X1X/4X1X
28/40/44-Pin Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology
Power-Managed Modes:
• Run:...
Description
PIC18F2X1X/4X1X
28/40/44-Pin Flash Microcontrollers with 10-Bit A/D and nanoWatt Technology
Power-Managed Modes:
Run: CPU On, Peripherals On Idle: CPU Off, Peripherals On Sleep: CPU Off, Peripherals Off Idle mode Currents Down to 3.0 μA Typical Sleep mode Currents Down to 20 nA Typical Timer1 Oscillator: 1.8 μA, 32 kHz, 2V Watchdog Timer: 2.1 μA Two-Speed Oscillator Start-up
Peripheral Highlights:
High-Current Sink/Source 25 mA/25 mA Up to 2 Capture/Compare/PWM (CCP) modules,
One with Auto-Shutdown (28-pin devices) Enhanced Capture/Compare/PWM (ECCP)
module (40/44-pin devices only): - One, two or four PWM outputs - Selectable polarity - Programmable dead time - Auto-shutdown and auto-restart Master Synchronous Serial Port (MSSP) module Supporting 3-Wire SPI (all 4 modes) and I2C™ Master and Slave modes Enhanced Addressable USART module: - Supports RS-485, RS-232 and LIN 1.2 - RS-232 operation using internal oscillator
block (no ...
Similar Datasheet