DatasheetsPDF.com

QSE-0xx-xx Dataheets PDF



Part Number QSE-0xx-xx
Manufacturers Samtec
Logo Samtec
Description Quiet and Basic High Speed Products
Datasheet QSE-0xx-xx DatasheetQSE-0xx-xx Datasheet (PDF)

Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 www.DataSheet4U.com Mating - Unmating Summary Report PARTS DESCRIPTIONS TERMINAL SIDE BTE-020-01-F-D-A BTE-060-01-F-D-A BTE-120-01-F-D-A REV: Q BTS-025-01-F-D-A BTS-075-01-F-D-A BTS-1.

  QSE-0xx-xx   QSE-0xx-xx



Document
Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 www.DataSheet4U.com Mating - Unmating Summary Report PARTS DESCRIPTIONS TERMINAL SIDE BTE-020-01-F-D-A BTE-060-01-F-D-A BTE-120-01-F-D-A REV: Q BTS-025-01-F-D-A BTS-075-01-F-D-A BTS-150-01-F-D-A REV: B BTH-030-01-F-D-A BTH-090-01-F-D-A BTH-150-01-F-D-A REV: K MIT-019-01-F-D-A MIT-076-01-F-D-A MIT-133-01-F-D-A REV: C QTE-020-01-F-D-A QTE-060-01-F-D-A QTE-100-01-F-D-A REV: X QTS-025-01-F-D-A QTS-075-01-F-D-A QTS-125-01-F-D-A REV: A QTH-030-01-F-D-A QTH-090-01-F-D-A QTH-150-01-F-D-A REV: N SOCKET SIDE BSE-020-01-F-D-A BSE-060-01-F-D-A BSE-120-01-F-D-A REV: D BSS-025-01-F-D-A BSS-075-01-F-D-A BSS-150-01-F-D-A REV: A BSH-030-01-F-D-A BSH-090-01-F-D-A BSH-150-01-F-D-A REV: D MIS-133-01-F-D-A MIS-019-01-F-D-A MIS-076-01-F-D-A REV: C QSE-020-01-F-D-A QSE-060-01-F-D-A QSE-100-01-F-D-A REV: R QSS-025-01-F-D-A QSS-075-01-F-D-A QSS-125-01-F-D-A REV: B QSH-030-01-F-D-A QSH-090-01-F-D-A QSH-150-01-F-D-A REV: F File: J:\QA LAB\Test Programs\TC0106-0334\tc0106—0334.doc Form 01 Rev 03 Page 1 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 CERTIFICATION www.DataSheet4U.com All instruments and measuring equipment were calibrated to National Institute for Standards and Technology (NIST) traceable standards according to IS0 10012-l and ANSI/NCSL 2540-1, as applicable. All contents contained herein are the property of Samtec. No portion of this report, in part or in full shall be reproduced without prior written approval of Samtec. SCOPE To perform the following tests: Mating - Unmating APPLICABLE DOCUMENTS Standards: EIA Publication 364 TEST SAMPLES AND PREPARATION 1) All materials were manufactured in accordance with the applicable product specification. 2) All test samples were identified and encoded to maintain traceability throughout the test sequences. 3) After soldering, the parts to be used for LLCR testing were cleaned according to TLWI-0001: a) Sample test boards are to be ultrasonically cleaned after test lead attachment, preparation and/or soldering using the following process. b) Immerse the sample test boards into the Branson 3510 cleaner which contains Kyzen Ionox c) d) e) f) g) HC1 (or equivalent) cleaning solution with the following conditions: i) Temperature: 55° C+/- 5° C ii) Frequency: 40 KHz iii) Immersion Time: 5 to 10 Minutes Sample test boards are then slowly removed and placed into the Branson 3510 cleaner which contains deionized water with the following conditions: i) Temperature: 55° C +/- 5° C ii) Frequency: 40 KHz iii) Immersion Time: 5 to 10 Minutes Sample test boards are then removed and placed in a beaker, on a hot plate with a magnetic stirrer containing deionized water warmed to 55° C +/- 5° C for 1/2 to 1 minute (Use 55° C as target) Upon removal, the sample test boards are then rinsed for 1/2 to 1 minute in room temperature free flowing deionized water. After the final rinse, the sample test boards are to be dried in an air-circulating oven for 10 to 15 minutes at 50° C +/- 5° C (Use 50° C as target) Sample test boards are then allowed to set and recover to room ambient condition prior to testing. 4) Parts not intended for testing LLCR and DWV/IR are visually inspected and cleaned if necessary. 5) Any additional preparation will be noted in the individual test procedures. File: J:\QA LAB\Test Programs\TC0106-0334\tc0106—0334.doc Form 01 Rev 03 Page 2 of 18 Project Number: NA Requested by: W. Ouyang Part #: See Front Page Tracking Code: 0212--0640 Date: 3/22/02 Lot #: 03/18/02 Product Rev: See Front Page Tech: G.Lewis Eng: J. Tozier Qty to test: 210 Part description: 0.8mm, 0.635mm, 0.5mm Quiet & Basic High Speed Products Test Start: 3/29/02 Test Completed: 6/6/02 ATTRIBUTE DEFINITION Following is a brief, simplified description of the attribute measured. www.DataSheet4U.com MATING/UNMATING: 1) Reference document: EIA-364-13, Mating and Unmating Forces Test Procedure for Electrical Connectors. 2) The full insertion position was to within 0.003” to 0.004” of the plug bottoming out in the receptacle to prevent damage to the system under test. 3) One of the mating parts is secured to a floating X-Y table to prevent damage during cycling. 4) Mating/Unmating forces were evaluated on the first cycle. 5) Number of Samples tested: 5 per series RESULTS BXX Series (data) _________________________________________________________________________________________________ • Mating Forces BXE Series Maximums .


QSE-060-xx QSE-0xx-xx D789104


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)