CU20029SCPB-T21A

5X7 Dot Character VFD Module ‰ ‰ ‰ ‰ ‰ ‰ ‰ CU20029SCPB-T21A 2 Lines of 20 Characters 9mm High High Speed Parallel/RS232 Serial Interface Operating Temp -10° C to +65° C Single 5V Supply High Brightness Blue Green Display ASCII, Katakana & Extended Character Font 8 User Definable Character RAM The module includes the Vacuum Fluorescent Display glass, driver and micro-controller ICs with refresh RAM, character generator and interface logic. The high speed 8 bit parallel interface is 5V CMOS compatible suitable for connection to a host CPU bus. The asynchronous serial interface accepts baud rates up to 19,200 with or without parity. Two character font tables can be hardware or software selected. User defined characters and many control commands are available. PWR (AMP171825-3) www.DataSheet4U.com IDC (16 WAY) 23.6 43.5 47.0 9.6 21.25 152.5 195.0 205.0 CHARACTER FONTS Value 5.0VDC +/- 5% 700mADC typ. 2.0VDC min. 0.8VDC max. 2.4VDC min. 0.5VDC max. 3.0VDC min. -3.0VDC max. Condition GND=0V Vcc=5V V CC=5V V CC=5V IOH = -2.0mA IOL =2.0mA V CC=5V V CC=5V 1.75 5.0 16.0 1.6 13.9 Dimensions in mm. See full spec for tolerances International Font Additional Katakana Font ELECTRICAL SPECIFICATION Parameter Symbol Power Supply Voltage V CC Power Supply Current ICC Logic High Input V IH Logic Low Input V IL Logic High Output V OH Logic Low Output V OL RS232 High Input V IH RS232 Low Input V IL The power on rise time should be less than 50ms.The inrush current at power on can be 2 x...