62MR2KLF

MODEL 62 1/4” Diameter Single Turn Cermet Trimming Potentiometer ELECTRICAL 1 Standard Resistance Range, Ohms Standard Resistance Tolerance Input Voltage, Maximum www.DataSheet4U.com Slider Current, Maximum Power Rating, Watts End Resistance, Maximum Actual Electrical Travel, Nominal Dielectric Strength Insulation Resistance, Minimum Resolution Contact Resistance Variation, Maximum ENVIRONMENTAL 10 to 1Meg ±10% (<100 Ohms = ±20%) 200 Vdc or rms not to exceed power rating 100mA or within rated power, whichever is less 0.5 at 70°C derating to 0 at 125°C 2 Ohms 220° 600Vrms 100 Megohms Essentially infinite 1% or 1 Ohm, whichever is greater Seal Temperature Coefficient, Maximum Operating Temperature Range Thermal Shock Moisture Resistance Shock, 6ms Sawtooth Vibration High Temperature Exposure Rotational Life Load Life at 0.5 Watts Resistance to Solder Heat MECHANICAL 85°C Fluorinert® (No Leaks) ±100ppm/°C –55°C to +125°C 5 cycles, –55°C to +125°C (1% ∆RT, 1% ∆VR) Ten 24 hour cycles (1% ∆RT, IR 100 Megohms Min.) 100G’s (1% ∆RT, 1% ∆VR) 20G’s, 10 to 2,000 Hz (1% ∆RT, 1% ∆VR) 250 hours at 125°C (2% ∆RT, 2% ∆VR) 200 cycles (2% ∆RT) 1,000 hours at 70°C (2% ∆RT) 260°C for 10 sec. (1% ∆RT) Mechanical Stops Torque, Starting Maximum Weight, Nominal Fluorinert® is a registered trademark of 3M Company. Specifications subject to change without notice. Solid 3 oz.-in. (0.021 N-m) .02 oz. (0.60 grams) 1-31 Model 62 TOP ADJUSTMENT (Inch/mm) Model 62P, 62PF Model 62P (1) (3) .007 Min...