6A Non-isolated DC/DC Converters
SIL06 Series
DC/DC CONVERTERS • • • •
Single output
1 NEW Product
6A Non-isolated DC/DC Converters
Ultra wide trim ra...
Description
SIL06 Series
DC/DC CONVERTERS
Single output
1 NEW Product
6A Non-isolated DC/DC Converters
Ultra wide trim range 0.9V to 3.3V/5.0V Current sink capability for termination application Horizontal and vertical-mount options available High power density design means reduced board space requirement Power good output signal (open collector) Operating ambient temperature up to +80ºC with suitable derating and forced air cooling Remote ON/OFF (active high) www.DataSheet4U.com 0A minimum load Input under-voltage lockout Over-current and short-circuit protection
The SIL06 Series is a new high density open frame non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 - 5.5VDC or 10.2 13.8VDC) and offer a wide 0.9 - 5V output voltage range with a 6A load. An external resistor adjusts the output voltage from its pre-set value of 0.9V to any value up to the 5V maximum. Typical efficiencies for the models are 89% for the 5V input version and 91% for the 12V input version. The SIL06 series offers remote ON/OFF and overcurrent protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL06 reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25°C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability (See Note 7) 5V input models 12V input models 0.9V to 3.3V 0.9V to 5.0V ±2.5% ±0.2% max....
Similar Datasheet