Hot Swappable 2-Wire Bus Buffers
Features
n Bidirectional Buffer for SDA and SCL Lines Increases Fanout
n Prevents SDA and SCL Corruption During Live Boa...
Description
Features
n Bidirectional Buffer for SDA and SCL Lines Increases Fanout
n Prevents SDA and SCL Corruption During Live Board Insertion and Removal From Backplane
n Isolates Input SDA and SCL Lines From Output n Compatible with I2C, I2C Fast Mode and SMBus
Standards (Up to 400kHz Operation) n Low ICC Chip Disable: <1µA (LTC4300-1) n READY Open-Drain Output (LTC4300-1) n 1V Precharge on All SDA and SCL Lines n Supports Clock Stretching, Arbitration and
Synchronization n 5V to 3.3V Level Translation (LTC4300-2) n High Impedance SDA, SCL Pins for VCC = 0V n Small MSOP 8-Lead Package
Applications
n Hot Board Insertion n Servers n Capacitance Buffer/Bus Extender n Desktop Computer
L, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks and Hot Swap and ThinSOT are trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. *Protected by U.S. Patents, including 6650174.
LTC4300-1/LTC4300-2
Hot Swappable 2-Wire Bus Buffers
Description
The LTC®4300 series hot swappable 2-wire bus buffers allow I/O card insertion into a live backplane without corruption of the data and clock busses. When the connection is made, the LTC4300-1/LTC4300-2 provide bidirectional buffering, keeping the backplane and card capacitances isolated. Rise time accelerator circuitry* allows the use of weaker DC pull-up currents while still meeting rise time requirements. During insertion, the SDA and SCL lines are precharged to 1V to minimize ...
Similar Datasheet