PCMCIA Power Controller
May. 2005
R5534V
PCMCIA Power Controller
sDESCRIPTION
The R5534V switches between the three VCC voltages (0V/3.3V/5.0V)...
Description
May. 2005
R5534V
PCMCIA Power Controller
sDESCRIPTION
The R5534V switches between the three VCC voltages (0V/3.3V/5.0V) and the VPP voltages (off/0V/3.3V/5.0V). The R5534V has two sets of VCC output and VPP output each, therefore it fits dual slot models. If VCC pin or VPP pin may be clamped to the GND, short current limit works at 1A(Min.) for VCC and 0.15A(Min.) for VPP. The R5534V is suitable for standard PCMCIA power controllers. z Low www.DataSheet4U.com z z z z z z
sFEATURES
on resistance P-channel MOSFET Switch Dual Slot Power Supply Control Over- Current Limit Protection Thermal Shutdown Protection Low Consumption Current Break-Before-Make Switching SSOP-20 pin Package
sAPPLICATIONS
Dual Slot PC card Power Supply Pin Voltage Switch Card-bus Slot Power Supply Control PC Card Reader/Writer
s PIN CONFIGURATION
AVCC5_EN AVCC3_EN AEN1 AEN0 TST VCC5IN AVCCOUT AVCCOUT AVPP OUT VCC3IN
1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11
BVCC5_EN BVCC3_EN BEN1 BEN0 GND VCC5IN BVCCOUT BVCCOUT BVPP OUT VCC3IN
*Note: Same name pins should be connected one another. Connect TST pin to VCC5IN pin.
Rev. 1.10
-1-
s BLOCK DIAGRAM
VCC5IN AVPP OUT
AVCC OUT
VCC3IN
A EN1 A EN0
GATE CONTROL LOGIC CURRENT LIMIT
www.DataSheet4U.com
AVCC5_EN
A VCC3_EN
VCC5IN
B V PPOUT
BV
CC
OUT
VCC3IN
B EN1 B EN0 B VCC5_EN B VCC3_EN GND
GATE CONTROL LOGIC THERMAL SHUTDOWN CURRENT LIMIT
s PIN DESCRIPTION
Symbol VCC5IN VCC3IN GND Pin description
5V Input Pin 3V Input Pin Ground Pin
VCC...
Similar Datasheet