Document
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-12V-TRB
● Features:
1. Emitted Color : White 2. Lens Appearance : Water Clear 3. Mono-color type. 4. 3.2x1.6x1.1mm(1206)standard package 5. Suitable for all SMT assembly methods. 6. Compatible with infrared and vapor phase
www.DataSheet4U.com
●Package Dimensions:
reflow solder process. equipment.
7. Compatible with automatic placement 8. For DC and pulse operationWith current 9. limiting resistor for 12V TTL & CMOS compatible. 10. This product doesn’t contain restriction Substance, comply ROHS standard. NOTES: 1.All dimensions are in millimeters (inches). 2.Tolerance is ± 0.10mm (0.004”) unless otherwise specified. 3.Specifications are subject to change without notice.
● Applications:
1. Automotive : Dashboards, stop lamps, turn signals. 2. 3. Backlighting : LCDs, Key pads advertising. Status indicators : Comsumer & industrial electronics.
4. General use.
● Absolute Maximum Ratings(Ta=25℃)
Parameter
Operating Voltage MXA Operating Temperature Storage Temperature Soldering Temperature
Symbol
VF Topr Tstg Tsol
Rating
12 -25℃~80℃ -30℃~85℃ See Page6
Unit
V -
*1 Condition for IFp is pulse of 1/10 duty and 0.1msec width.
Ver.1.0 Page 1 of 6
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-12V-TRB
Max.
12 576 -
● Electrical and optical characteristics(Ta=25℃
Parameter
Forward Voltage Luminous Intensity Peak Wave Length Dominant Wave Length Spectral Line Half-width
www.DataSheet4U.com
Symbol
Vf Iv λp λd Δλ 2θ1/2
Condition
IF=20mA VF=12V VF=12V VF=12V VF=12V IF=20mA
Min.
3.7 566 -
Typ.
7 10 568 30 120
Unit
V mcd nm nm nm deg
Veiwing Angle
Typical Electro-Optical Characteristics Curves
Fig.1 Relative intensity vs. wavelength
1.0 60
Fig.2 Forward current derating curve vs. ambient temperature
50
Relative radiant intensity
0.5
Forward current (mA)
40
30
20
10
0
518
568
618
0
20
40
60
80
100
Wavelength (nm)
Ambient temperature Ta( C)
Fig.3 FORWARD CURRENT VS. FORWARD VOLTAGE
30 3.0
Fig.4 Relative luminous intensity vs. ambient temperature
FORWARD CURRENT (mA)
24
2.5
18
Relative Luminous intensity (Normalized @20mA) 4 8 12 16 20
2.0
1.5
12
1.0
6
0.5
0
0 -40
-20
0
20
40
60
FORWARD VOLTAGE (V)
A Ambient temperature Ta( C)
Fig.5 Relative luminous intensity vs. forward current
2.0
Fig.6 Radiation diagram
0 10 20 30
Relative luminous intensity (@20mA)
1.5
1.0
Relative radiant intensity
1.0
40
0.9 0.8
50 60 70
0.5
0.7
80 90
0
10
20
30
40
50
0.5
0.3
0.1
0.2
0.4
0.6
Forward current (mA)
Ver.1.0 Page 2 of 6
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-12V-TRB
● Tapping and packaging specifications(Units: mm)
USER DIRECTION OF FEED 1.88±0.1 START END 1.27±0.1 13.0±0.5
+
5.3 ± 0.05 13.0± 0.5 71.0±1
8.0 ± 0.3
RL
3.5±0.1
www.DataSheet4U.com
4.0 ± 0.1 4.0 ± 0.1 1.5±0.1 2.0±0.05 1.75 ± 0.1 LEADER 0.3 FIXING TAPE
●Package Method:(unit:mm)
3.5 ± 0.05
TRAILER
NOTE: 3000 pcs PER REEL
12 bag/box 3000 pcs/reel
220
Bar Code Label
245
200 185
220
Aluminum Foil Bag
645
6 box/carton
210 470
Ver.1.0 Page 3 of 6
179±1
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-12V-TRB
● Reliability Test
Classification Test Item Reference Standard Test Conditions Result
Operation Life MIL-STD-750:1026 MIL-STD-883:1005 JIS-C-7021 :B-1 High www.DataSheet4U.com Temperature MIL-STD-202:103B High Humidity JIS-C-7021 :B-11 Endurance Storage Test High MIL-STD-883:1008 Temperature JIS-C-7021 :B-10 Storage Low :B-12 Temperature JIS-C-7021 Storage Temperature MIL-STD-202:107D Cycling MIL-STD-750:1051 MIL-STD-883:1010 JIS-C-7021 :A-4 Thermal Shock MIL-STD-202:107D Environmental MIL-STD-750:1051 Test MIL-STD-883:1011 Solder MIL-STD-202:201A Resistance MIL-STD-750:2031 JIS-C-7021 :A-1
Connect with a power If=20mA Ta=Under room temperature Test time=1,000hrs Ta=+65℃±5℃ RH=90%-95% Test time=240hrs High Ta=+85℃±5℃ Test time=1,000hrs Low Ta=-35℃±5℃ Test time=1,000hrs -35℃ ~ +25℃ ~ +85℃ ~ +25℃ 60min 20min 60min 20min Test Time=5cycle -35℃±5℃ ~+85℃±5℃ 20min 20min Test Time=10cycle Preheating: 140℃-160℃,within 2 minutes. Operation heating: 235℃(Max.), within 10seconds. (Max.)
0/20
0/20
0/20
0/20
0/20
0/20
0/20
● Judgment criteria of failure for the reliability
Measuring items Forward voltage Reverse current Luminous intensity Symbol VF ( V) IR(uA) Iv ( mcd ) Measuring conditions IF=20mA VR=5V IF=20mA Judgement criteria for failure Over Ux1.2 Over Ux2 Below SX0.5
Note:
1.U means the upper limit of specified characteristics.
S means initial value.
2.Measurment shall be taken between 2 hours and after the test pieces have been returned to normal ambient conditions after completion of each test.
Ver.1.0 Page 4 of 6
BRIGHT LED ELECTRONICS CORP.
SINCE 1981
BR-HG033-12V-TRB
● Soldering :
1. Manual Of Soldering The temperature of the iron tip should not be higher than 300℃(572℉) and Soldering within 3 seconds per solder-land is to be observed. 2. Reflow Soldering Preheating : 140℃~160℃±5℃,within 2 .