Document
Bussmann®
Class J Fuseblocks
Pyramid Style 600 Volt, 30 Amps
Dimensional Data
JP Series
*All other dimensions (± 0.015∑) (± 0.40mm)
DIN-RAIL MOUNTING SCREW 8" (203.2mm) APART. END STOPS - PREVENT BLOCK MOVEMENT WHEN CHANGING FUSES
4.00" MAX.
(101.6mm)
www.DataSheet4U.com
1.88"
(95.3mm) (± 0.50)
3.75" (± 0.02)
(47.6mm)
(30.2mm) (60.4mm)
1.19"
2.38"
Catalog Symbol: JP Series Pyramid Style Fuseblock Ampere Rating: 30 Amperes Voltage Rating: 600 Volts Withstand Rating: 200,000 RMS Sym. Amps Agency Information: U.L. Listed, U.L. 512, Guide IZLT, File E14853 CSA Certified, C22.2 No. 39, Class 4225-04, File 47235 For use with Class J Fuses (Bussmann LPJ, JKS) U.L. Flammability: 94VO Material: Thermoplastic
Pyramid® J Fuseblock; 30A, 600V; 3-Pole; Panel or 35mm DIN-Rail Mount; Clips with Reinforcing Springs
Mounting Screws with Pressure Plate JP60030-3PR (#10-14 CU ONLY) JP60030-3PRA (#10-14 CU ONLY) Catalog Numbers Box Aluminum JP60030-3CR (#2-14 CU/AL) JP60030-3CRA (#2-14 CU/AL) Copper Only JP60030-3COR (#2-14 CU ONLY) JP60030-CORA (#2-14 CU ONLY)
3.29" (± 0.03) (83.6mm) (± 0.76)
(77.8mm)
3.06"
(70.6mm)
2.78"
(79.5mm)
3.13"
ADAPTER FOR 35mm SYMMETRICAL DIN-RAIL MOUNTING
Panel With DIN-Rail Adapter*
*Adapter Only for DIN-Rail - Cat No. JPA-3.
CE logo denotes compliance with European Union Low Voltage Directive (50-1000 Vac, 75-1500 Vdc). Refer to BIF document #8002 or contact Bussmann Application Engineering at 314-527-1270 for more information.
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
1-16-02
SB02003
Form No. JP Series Page 1 of 1 BIF Doc #1108
.