HMF4M32M8GL

HANBit HMF4M32M4GL FLASH-ROM MODULE 16MByte (4M x 32-Bit), 72-Pin SIMM, 5V Part No. HMF4M32M8GL GENERAL DESCRIPTION The HMF4M32M8GL is a high-speed flash read only memory (FROM) module containing 4,194,304 words organized in a x32bit configuration. The module consists of eight 2M x 8bit FROM mounted on a 72 -pin, single-sided, FR4-printed circuit board. Commands are written to the command register using standard microprocessor write timings. Register contents serve as input to an internal state-machine, which controls the erase and programming circuitry. Write cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the www.DataSheet4U.com device is similar to reading from 12.0V flash or EPROM devices. Four chip enable inputs, (/WE0, /WE1, /WE2, /WE3) are used to enable the module ’s 8bits independently. Output enable (/OE) and write enable (/WE) can set the memory input and output. When FROM module is disable condition the module is becoming power standby mode, system designer can get low -power design. All module components may be powered from a single +5 V DC power supply and all inputs and outputs are TTLcompatible. FEATURES w Access time : 75, 90 and 120ns w High-density 16MByte design w High-reliability, low-power design w Single + 5V ± 0.5V power supply w Easy memory expansion w All inputs and outputs are TTL-compatible w FR4-PCB design w Low profile 72-pin SIMM w Minimum 1,000,000-write/erase cycle w Secto...