Circuit Protector Elements
Circuit Protector Elements
UNH0003
Circuit Protector Elements
Unit: mm
For overcurrent protection
1.5 max.
5.0±0.2
4...
Description
Circuit Protector Elements
UNH0003
Circuit Protector Elements
Unit: mm
For overcurrent protection
1.5 max.
5.0±0.2
4.0±0.2
■ Features
Sharp cutoff characteristics and low voltage drop Flame retardant package and low heat generation, high density mounting is possible. The package is molded with high dimensional accuracy.
www.DataSheet4U.com ■ Absolute
0.7±0.1
0.7±0.2
Maximum Ratings Ta = 25°C
Symbol Topr Tstg Rating −55 to +125 −55 to +125 Unit °C °C
0.45+0.15 –0.1 2.5+0.6 –0.2 2.5+0.6 –0.2
12.9±0.5
0.45+0.15 –0.1
Parameter Operating ambient temperature Storage temperature
2.3±0.2
5.1±0.2
1 2 3
■ Electrical Characteristics Ta = 25°C ± 3°C
Parameter Rated voltage Rated current Internal resistance Cutoff current * Standard temperature rise 70 Min Typ 50 0.6 83 1.7 7 96 Max Unit V A mΩ A °C
1: For use 2: N.C. 3: For use TO-92-C1 Package
Marking Symbol: 0003
Note) *: Measurement condition of cutoff current shall be at Ta = 25°C, t = 1s Tolerance of cutoff current shall be ± 25%
■ Usage Notes
Package shall be overheated and dangerous for overcurrent. This device should be used only to the secondary circuit. Package will be damaged for added overpower. This device is not electrical fuse legally. Please draw a clear line between electrical fuse from this device.
Publication date: January 2004
SQB00023BED
1
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export ...
Similar Datasheet