Document
FREQUENCY
www.DataSheet4U.com
QEA95 / QEA95V
SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications
Specification (Rev-E)
Electrical Characteristics ......................................................P01 Environmental Specifications ................................................P02 Mechanical Characteristics ...................................................P02 Ordering Information .............................................................P03 Test Circuit............................................................................P03 Packaging Drawing ...............................................................P04 Suggested Reflow Soldering.................................................P05
Frequency
QEA95 / QEA95V
SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications
Specification (rev-E) March 16th, 2006
Electrical Characteristics
□ Output : Clipped SineWave □ Load : 10KΩ//10pF www.DataSheet4U.com □ Standard frequency : 10.0 – 12.8 – 13.0 – 14.4 – 14.7456 – 16.384 – 19.2 – 19.44 – 20.0 – 21.4 MHz
Electrical Parameters Frequency Range Operating Temperature Range Storage Temperature Range Power supply Frequency Adjustment
type QEA95 type QEA95V type QEA95V1 type QEA95 type QEA95V type QEA95V1
Unit MHz °C °C V ± ppm
Minimum
9.6
Typical
Maximum
40
Test conditions
-30 to 75 -40 3.0 3.0 3.0 Trimmerless
-40 to 85 85 5.0
Refer to Ordering Information
Refer to Ordering Information Mechanical Trimmer
Preset Frequency ± ppm ± ppm ± ppm ± ppm ± ppm mA Vp-p
5 8 -90 -128 -147 -148 2.5
0.5 0.5 2.0
At 25°C ± 2°C
Stability vs Operating Temperature Range Stability vs voltage variation (± 5%)
Stability vs load variation (± 10%)
Refer to Ordering Information
0.3 0.3 1.0 1.5 2.0 0.8 0.7 10 14 For frequency less than 28MHz (see Note 2) With load 10KΩ//10pF For frequency less than 28MHz (see Note 1)
Aging (First year at 25°C) Supply Current
9.6MHz ≤ Fo < 16.000MHz 16.0MHz ≤ Fo ≤ 40.000MHz
Output voltage
9.6MHz ≤ Fo < 16.000MHz 16.0MHz ≤ Fo ≤ 40.000MHz
Clipped Sine DCcut 5V => Vc=2.50 ± 2.00V 3.3V=> Vc=1.65 ± 1.35V 3.0V=> Vc=1.50 ± 1.00V
Pulling Range
type QEA95 type QEA95V type QEA95V1 Phase Noise
ppm
offset 10Hz offset 100Hz offset 1KHz offset 10KHz
dBc/Hz
Typical value for 10MHz TCXO.
Note 1 : for frequency ≥ 28MHz, stability vs voltage variation (± 5%) is ± 1.0ppm max Note 2 : for frequency ≥ 28MHz, aging first year ± 2.0ppm max
1
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
Frequency
QEA95 / QEA95V
SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications
Specification (rev-E) March 16th, 2006
Environmental Specifications
www.DataSheet4U.com
Item Vibration Test Shock Test Humidity
Specifications Freq : 10 ~ 55Hz Cycle : 2.00mm, 3 directions each 2 hours Random drop onto concrete 10 times from height of 75 cm RH : 90% at 40degC during 200 hours
Mechanical Characteristics
BOTTOM VIEW SUGGESTED PAD
H
Hmax = 2.00 mm
Pin connections 4 pins version 6 pins version #1 Vcont or NC #5 Vcont or NC #2 GND #1,2,4 GND #3 Output #3 Output #4 Vcc #6 Vcc
Line 1 Line 2 Line 3
Marking QEA95 QEA95V QEA95V1 E2 AA0* G2 AA0* H2 AA0* Frequency in MHz (6 digits) Date code (YYWW) – Manuf. code
* : see letters for Temperature stability, supply voltage and output Example for QEA95 AA0 / 10.000MHz Line 1 : E2 AA0 Line 2 : 10.000 Line 3 : 0610-R
2
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
Frequency
QEA95 / QEA95V
SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications
Specification (rev-E) March 16th, 2006
Ordering Information
Part numbering system QEA95 V
www.DataSheet4U.com
A
E
O
12.800MHZ
Package type SMD Package QEA95 : SMD 9.6x11.4
Voltage Control
Temperature Stability
Supply voltage
Output 0 : Clipped sine wave
Nominal Frequency (MHz) Please enter the nominal frequency
Blank :
TCXO with trimmer
B: V: C: VC-TCXO with trimmer D : V1 : E:
VC-TCXO trimmerless
A : ± 2.5ppm vs –30 to +75°C A : + 5.0V ± 1.5ppm vs –20 to +70°C D : +3.3V ± 3.5ppm vs –40 to +85°C E : + 3.0V
± 5.0ppm vs –40 to +85°C ± 2.0ppm vs –20 to +70°C
Test Circuit
3
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
Frequency
QEA95 / QEA95V
SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications
Specification (rev-E) March 16th, 2006
Tape Drawing
www.DataSheet4U.com
Reel Drawing
Multiple : 1Kpcs per Reel Unit : mm
4
TEMEX reserves the right to modify herein specifications and informations at any time when necessary to provide optimum performance and cost.
Frequency
QEA95 / QEA95V
SMD 9.6x11.4 TCXO / VC-TCXO – Communications equipment applications
Specification (rev-E) March 16th, 2006
Suggested Reflow Soldering Profile
www.DataSheet4U.com
5
TEMEX reserves the .