Tel: 0044 (0)118 979 1238 Fax: 0044 (0)118 979 1283 E-mail:
[email protected]
ACT9353
The ACT9353 is a miniature low profile Clock Oscillator, housed in a ceramic leadless chip carrier with a SMD seam welded metal lid for high reliability and long term stability. The metal lid is grounded via the package to assist with EMI emission control. This 5x3.2mm packaged device is available in 1.8 ~ 5.0 volt supply voltages and with stabilities from ±20ppm to ±100ppm It is suitable for a wide range of applications. Taped and reeled packaging and loose quantities are available for purchase, to suit high and low volume requirements. The pads are gold plated on all surfaces to allow a variety of assembly processes, including reflow and wire bonding
Specification
Parameter
Frequency Range
Symbol
f0 Δf/f0 Topr Tstg VDD Tw/t
Specification
1.000 to 50.000MHz ±20, ±25, ±50 or ±100ppm ( Inclusive of Operating Temperature,range,Supply Voltage & Load ) 0 ~ +70°C & -40 ~ +85°C -55 to +125°C 1.8V, 2.5V, 3.3V & 5.0V 40/60% Std, ( Option 45/55% ) ( At 50% of Waveform w/HCMOS Load or 1.4DC w/TTL Load ) 1.8VDC±10% 2.5VDC±10% 7mA 8mA 15mA 10% V DD max (HCMOS) 90% V DD min (HCMOS) 10nS max 10TTL Load or 15pF HCMOS Load ( Std ) 10mS max No Connection Enable output Enable output Disable output : High Impedance ( ±3ppm Available to "custom" order ) ( See page 2 for full profile ) 260°C Max Jitter Parameter Phase 12kHz~20MHz 1 ~12.999 Period (rms) Period (pk-pk) Phase 12kHz~20MHz 13 ~ 34.999 Period (...
