Power Shelves. AFS4000 Datasheet

AFS4000 Shelves. Datasheet pdf. Equivalent

Part AFS4000
Description (AFS4000 / AFS6000) Rack Mountable Power Shelves
Feature AFS4000 and AFS6000 Rack Mountable Power Shelves NOTICE SOME MODELS LISTED IN THIS DOCUMENT HAVE BEE.
Manufacture Artesyn Technologies
Datasheet
Download AFS4000 Datasheet




AFS4000
AFS4000 and AFS6000
Rack Mountable Power Shelves
NOTICE SOME MODELS LISTED IN THIS
DOCUMENT HAVE BEEN DISCONTINUED
Please contact your local Artesyn representative
or use the on line model number search tool at
http://www.artesyn.com/powergroup/products.htm
to find a suitable alternative.
www.DataSheet4U.com
[ 2 YEAR WARRANTY ]
• Front-end shelves for AFE2000 series power supplies
• Distributed power architecture
• UL and TUV approval
• Hot-swap power system
• N+1 redundancy
The AFS4000 and AFS6000 power shelves are designed to house Artesyn standard
AFE2000 series front-end power supplies. The shelves mount into standard 19 inch
racks. The power shelves accept high range (200 to 240VAC) AC power and deliver a
regulated DC bus voltage generated from the AFE2000 power supplies. The power
shelf provides input filtering and protection and individual 20 Amp circuit breakers for
each AFE2000 power supply are provided on the front end of the shelf. An output bus
bar on the rear of the unit is provided for distribution of the main output to system
payload. Control, diagnostic and protection signals and the auxiliary output from
AFE2000 power supplies are routed through the power shelf to a parallel interface
connector on the rear of the unit. Clearance is provided on the rear of the unit to
maintain adequate airflow and cooling of the AFE2000 power supplies mounted within
the shelf.
POWER SHELF
AFS4000-3U2P
AFS6000-4U3P
MAIN OUTPUT
POWER
4000W
N+1 REDUNDANT
POWER
2000W
6000W
4000W
HEIGHT
3U (5.25 inch)
AFE2000 POWER
SUPPLIES
2
4U (7.0 inch)
3
AFS Power Shelf Characteristics
SIGNAL
INTERFACE
Parallel via 25 pin D
type connector
Parallel via 37 pin D
type connector
POWER SHELF
AFS4000-3U2P
AFS6000-4U3P
POWER MODULE
AFE2000-26S48NA
AFE2000-26S54NA
48V @ 83A
12V @ 2A
54.5V @ 73A
12V @ 2A
48V @ 124A
12V @ 3A
54.5V @ 109A
12V @ 3A
AFE2000 Output Configurations with AFS Power Shelves
AFE2000-26S56NA
56.2V @ 71A
12V @ 2A
56.2V @ 106A
12V @ 3A
Nominal Input Voltage
200VAC
200VAC
220VAC
240VAC
Line Current (Typical)
11.6A rms
11.2A rms
10.6A rms
9.7A rms
AC Input Line Cord Current
(for each AFE2000 module within power shelf)
PAGE 1



AFS4000
DISTRIBUTED POWER FRONT END AC/DC POWER SUPPLIES | 2000W AC/DC
AFS4000 and AFS6000 Rack-mountable
power shelves for AFE2000 series modules
Mechanical Notes for AFS4000-2U2P Interface Drawing
1 All dimensions in inches (mm).
www.DataSheet4U.com
17.32
(439.93)
NORMAL
AIR FLOW
ALLOW 6" CLEARENCE
FRONT / BACK TO
INSURE ADEQUATE
COOLING
VENT AREA
(KEEP FREE OF OBSTRUCTIONS)
CUSTOMER SIGNAL
ACCESS (CONNECTOR)
MATE - USE 25 PIN
D-TYPE CONNECTOR
CUSTOMER DC OUTPUT
POWER BUS ACCESS
(TWO 10-32 STUDS
EACH OUTPUT
VIEW A-A
REAR VIEW
CHASSIS GND
(#8-32 STUDS)
CUSTOMER 200-240 VAC INPUTS
HUBBELL H320BL
MATE - USE 20 AMP POWER CORD
WITH HUBBELL H320C CONNECTOR
13.5 (342.90)
0.12
(3.05)
AC SECTION
BREAKERS/LINE FILTERS
AFE2000 SERIES
HOT PLUGGABBLE
POWER SUPPLIES
POWER SYSTEM
OPTION SLOT
VENTING FOR POWER SYSTEM
1.50
0.406
A
OPTION SLOT PWB - FARSIDE
(31.0)
(10.312)
REF
TYP
0.265
(6.731)
TYP
5.22 2.250
(132.59) (57.150)
A MOUNTING BRACKETS
OPTIONAL LOCATION
0.093 (2.362) REF
CLEARANCE TO ACCOMMODATE
CABINET RAIL MTG/SUPPORT
1.49 (37.85)
18.31 (465.07)
19.00 (482.60)
International Safety Standard Approvals
EN60950/IEC950 File No. E9972397
UL1950 File No. E135734
Please consult our website for the following items: Application Note
http://www.artesyn.com
PAGE 2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)