LBT10102

China Electronics Technology Group Corporation No.26 Research Institute 101.3MHz SAW Filter 5MHz Bandwidth Part Number: LBT10102 www.sipatsaw.com SIPAT Co., Ltd. Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth www.DataSheet4U.com 35 dB Bandwidth Unit MHz dB MHz MHz MHz MHz MHz MHz MHz dB usec Minimum 101.2 5.05 60 Typical 101.3 25.4 4.8 5.06 5.8 5.85 5.88 5.91 5.94 0.8 3.96 62 -1.82 25 Maximum 101.4 27 5.9 6 6.3 7 1.0 4 - 40 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth 55 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection(f0±15MHz) Material Temperature coefficient Ambient Temperature Package Size dB KHz/°C °C DIP3512 (35.0x12.8x4.7mm3) Notes: 1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show Matching Configuration INPUT 50Ω L1 L2 OUTPUT 50Ω L1=56nH L2=100nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. SIPAT Co., Ltd. ( CETC No. 26 Research Institute ) Nanping Huayuan Road No. 14 Chongqing, China, 400060 Part Number Rev. Date Rev. LBT10102 2006-12-1 1.0 Page 1/3 Phone: +86-23-62808818 Fax: +86-23-62805...