Document
IDT74LVCH32245A 3.3V CMOS 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
IDT74LVCH32245A 3.3V CMOS 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS, 5 VOLT TOLERANT I/O, BUS-HOLD
• Typical tSK(o) (Output Skew) < 250ps • ESD > 2000V per MIL-STD-883, Method 3015; > 200V using machine model (C = 200pF, R = 0) • VCC = 3.3V ± 0.3V, Normal Range • VCC = 2.7V to 3.6V, Extended Range • CMOS power levels (0.4µ W typ. static) www.DataSheet4U.com • All inputs, outputs, and I/O are 5V tolerant • Supports hot insertion • Available in 96-ball LFBGA package
FEATURES:
DESCRIPTION:
DRIVE FEATURES:
• Balanced Output Drivers: ±24mA • Reduced system switching noise
APPLICATIONS:
This 32-bit bus transceiver is built using advanced dual metal CMOS technology. This high-speed, low power transceiver is ideal for asynchronous communication between two busses (A and B). The Direction and Output Enable controls are designed to operate the device as either four independent 8-bit transceivers or one 32-bit transceiver. The direction control pins (DIR) control the direction of data flow. The output enable pins (OE) override the direction control and disable both ports. All inputs are designed with hysteresis for improved noise margin. All pins can be driven from either 3.3V or 5V devices. This feature allows the use of this device as a translator in a mixed 3.3V/5V supply system. The LVCH32245A has been designed with a ±24mA output driver. This driver is capable of driving a moderate to heavy load while maintaining speed performance The LVCH32245A has “bus-hold” which retains the inputs’ last state whenever the input goes to a high impedance. This prevents floating inputs and eliminates the need for pull-up/down resistors.
• 5V and 3.3V mixed voltage systems • Data communication and telecommunication systems
FUNCTIONAL BLOCK DIAGRAM
A3 A4 J3 J4
1DIR
3DIR 1OE
3OE
1A1
A5 A2
3A1 1B1
J5 J2
3B1
TO SEVEN OTHER CHANNNELS
TO SEVEN OTHER CHANNNELS
2DIR
H3 H4
4DIR 2OE
T3 T4
4OE 4A1
N5 N2
2A1
E5 E2
2B1
4B1
TO SEVEN OTHER CHANNNELS
TO SEVEN OTHER CHANNNELS
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
1
©2000 Integrated Device Technology, Inc.
FEBRUARY 2000
DSC-4767/1
IDT74LVCH32245A 3.3V CMOS 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
PIN CONFIGURATION
6
1A2
1A4
1A6
1A8
2A2
2A4
2A6
2A7
3A2
3A4
3A6
3A8
4A2
4A4
4A6
4A7
5
1A1
1A3
1A5
1A7
2A1
2A3
2A5
2A8
3A1
3A3
3A5
3A7
4A1
4A3
4A5
4A8
4 1OE
GND
VCC VCC
GND
GND
VCC VCC
GND GND
2OE
3OE
GND GND
3B3
VCC VCC
3B5
GND GND
3B7
GND GND
4B1
VCC VCC
4B3
GND GND
4B5
4OE
3 1DIR GND www.DataSheet4U.com 2 1B1 1B3
GND
1B7
GND
2B1
2DIR
3DIR
4DIR
1B5
2B3
2B5
2B8
3B1
4B8
1
1B2 A
1B4 B
1B6 C
1B8 D
2B2 E
2B4 F
2B6 G
2B7 H
3B2 J
3B4 K
3B6 L
3B8 M
4B2 N
4B4 P
4B6 R
4B7 T
LFBGA TOPVIEW
96 BALL LFBGA PACKAGE ATTRIBUTES
1.5 mm Max. 1.4 mm Nom. 1.3 mm Min.
0.8mm
6
5 4 3 2 1 A B C D E F G H J K L M N P R T
TOP VIEW
A 1 2 3
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
5.5mm
4 5 6
13.5mm
2
IDT74LVCH32245A 3.3V CMOS 32-BIT BUS TRANSCEIVER WITH 3-STATE OUTPUTS
INDUSTRIAL TEMPERATURE RANGE
ABSOLUTE MAXIMUM RATINGS(1)
Symbol Description Max VTERM TSTG IOUT IIK IOK ICC ISS Terminal Voltage with Respect to GND Storage Temperature DC Output Current Continuous Clamp Current, VI < 0 or VO < 0 Continuous Current through each VCC or GND –0.5 to +6.5 –65 to +150 –50 to +50 –50 ±100
Unit V °C mA mA mA
CAPACITANCE (TA = +25°C, F = 1.0MHz)
Symbol CIN COUT CI/O Parameter(1) Input Capacitance Output Capacitance I/O Port Capacitance Conditions VIN = 0V VOUT = 0V VIN = 0V Typ. 4.5 6.5 6.5 Max. 6 8 8 Unit pF pF pF
NOTE: 1. As applicable to the device type.
NOTE: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational www.DataSheet4U.com sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
PIN DESCRIPTION
Pin Names xOE xDIR xAx xBx Description Output Enable Input (Active LOW) Direction Control Input Side A Inputs or 3-State Outputs(1) Side B Inputs or 3-State Outputs(1)
FUNCTION TABLE(1)
Inputs xOE L L H
NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don’t Care Z = High Impedance
xDIR L H X
Outputs Bus B data to Bus A Bus A data to Bus B Z
NOTE: 1. These pins have "Bus-Hold". All other pins are standard inputs, outputs, or I/Os.
BUS-HOLD CHARACTERISTICS
Symbol IBHH IBHL IBHH IBHL IBHHO IBHLO
NOTES: 1. Pins with Bus-Hold are identified in the pin description. 2. Typical values are at VCC = 3.3V, +25°C ambient.
Parameter(1) Bus-Hold Input Sustain Current Bus-Hold Input Sustain Current Bus-Hold Input Overdrive Current .