Document
Global Mixed-mode Technology Inc.
G1422
2W Stereo Audio Amplifier
Features
General Description
The G1422 is a stereo audio power amplifier in 20pin TSSOP thermal pad package. It can drive 2W continuous RMS power into 4Ω load per channel in Bridge-Tied Load (BTL) mode at 5V supply voltage. Its THD is smaller than 1% under the above operation condition. To simplify the audio system design in the notebook application, the G1422 supports the BridgeTied Load (BTL) mode for driving the speakers, Single-End (SE) mode for driving the headphone. For the low current consumption applications, the SHDN mode is supported to disable the G1422 when it is idle. The current consumption can be further reduced to below 2µA.
www.DataSheet4U.com
Depop Circuitry Integrated Output Power at 1% THD+N, VDD=5V --2W/CH (typical) into a 4Ω Load --1.2W/CH (typical) into a 8Ω Load Bridge-Tied Load (BTL), Single-Ended (SE) Shutdown Control Available Thermal protection Surface-Mount Power Package 20-Pin TSSOP-P
Applications
Stereo Power Amplifiers for Notebooks or Desktop Computers Multimedia Monitors Stereo Power Amplifiers for Portable Audio Systems
Ordering Information
ORDER NUMBER
G1422F2U Note:F2: TSSOP-20 (FD) U: Tape & Reel
ORDER NUMBER (Pb free)
G1422F2Uf
MARKING
G1422
TEMP. RANGE
-40°C to +85°C
PACKAGE
TSSOP-20 (FD)
Pin Configuration
G1422
SHUTDOWN GND/HS +OUTA VDD -OUTA -INA GND/HS +INA GND/HS 1 2 3 4 5 6 7 8 9 19 18 17 16 15 14 13 12 20 HP-IN GND/HS +OUTB VDD -OUTB -INB BYPASS +INB GND/HS
Thermal Pad
GND/HS 10
11 GND/HS
Top View TSSOP-20 (FD)
Bottom View
Note: Recommend connecting the Thermal Pad to the GND for excellent power dissipation.
Ver: 1.2 Jun 29, 2005
TEL: 886-3-5788833 http://www.gmt.com.tw
1
Global Mixed-mode Technology Inc.
Absolute Maximum Ratings
Supply Voltage, VCC…………………..…...…….……...6V Operating Ambient Temperature Range TA…….…………………………….……….-40°C to +85°C Maximum Junction Temperature, TJ…..……….….150°C Storage Temperature Range, TSTG….…-65°C to+150°C Reflow Temperature (soldering, 10sec)….……..260°C
G1422
Power Dissipation (1) TA ≤ 25°C………………………………………….2.7W TA ≤ 70°C………………………………………….1.7W TA ≤ 85°C………………….………………………1.4W Electrostatic Discharge, VESD Human body mode..………………….…-3000 to 3000(2)
Note:
(1) (2)
: Recommended PCB Layout : Human body model : C = 100pF, R = 1500Ω, 3 positive pulses plus 3 negative pulses
www.DataSheet4U.com
Electrical Characteristics
DC Electrical Characteristics, VDD = 5.0V, TA=+25°C, unless otherwise noted PARAMETER
Supply Current DC Differential Output Voltage IDD in Shutdown Headphone High Input Voltage Headphone Low Input Voltage
SYMBOL
IDD VO(DIFF) ISD VIH VIL VDD = 5V
CONDITION
Stereo BTL STEREO SE VDD = 5V,Gain = 2 VDD = 5V
MIN
--------4 ---
TYP
8.5 4 5 0.1 -----
MAX
15 8 50 2 --0.8
UNIT
mA mV µA V V
(AC Operation Characteristics, VDD = 5.0V, TA=+25°C, RL = 4Ω, unless otherwise noted) PARAMETER SYMBOL CONDITION
THD = 1%, BTL, RL = 4Ω THD = 1%, BTL, RL = 8Ω THD = 10%.