(AQZxxxD) POWER PhotoMOS RELAYS
POWER PhotoMOS RELAYS (Voltage Sensitive Type)
PhotoMOS RELAYS
4. Both AC/DC dual types and DC-only types are available...
Description
POWER PhotoMOS RELAYS (Voltage Sensitive Type)
PhotoMOS RELAYS
4. Both AC/DC dual types and DC-only types are available The AC/DC dual type is capable of bi-directional control, and unlike conventional SSRs, does not have to be used differently depending on the load. The DC-only type is well suited for control of DC solenoids and DC motors. 5. High sensitivity, low ON resistance A maximum 3.6 A load can be controlled with the minimum input voltage of 4 V DC. The ON resistance is also low at 0.09 Ω (AQZ102D). 6. Small scale, slim type, 4-pin SIL Length 21.0 mm×width 3.5 mm×height 12.5 mm. High precision mounting is possible because of the small 73.5mm2 area of the 4-pin SIL.
21±0.2 .827±.008
3.5±0.2 .138±.008 12.5±0.2 .492±.008
FEATURES
1. A voltage sensitive power PhotoMOS relay Conventional power PhotoMOS relays are connected externally to an input limiting resistor in order to obtain the appropriate LED current. Adding an internal constant-current element renders the input limiting resistor unnecessary, making it possible for the PhotoMOS relay to be voltage driven. 2. Wide range of input voltages Allows a wide range of input voltages from 4 to 30 V DC. The relay can be used in 5 V, 12 V or 24 V DC systems. 3. Large capacity PhotoMOS relay Supports the various types of load control, from very small loads to a maximum 2.7 A for the AC/DC dual type, 3.6 A for the DC-only type.
www.DataSheet4U.com mm inch
–
1
+
2
3
4
AC/DC type
–
1
+
2
–
3
+
4
DC type
TYP...
Similar Datasheet