Document
10 SEGMENTS BAR GRAPH ARRAY
DC10SRWA
SUPER BRIGHT RED
Features
zLOW CURRENT OPERATION. www.DataSheet4U.com zEXCELLENT ON/OFF CONTRAST. zWIDE VIEWING ANGLE. zEND STACKABLE.
zSUITABLE FOR LEVEL INDICATORS.
Description
The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode.
zMECHANICALLY RUGGED.
zBI-COLOR VERSION AVAILABLE. z RoHS COMPLIANT.
zSTANDARD : GRAY FACE, WHITE SEGMENT.
Package Dimensions & Internal Circuit Diagram
Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0 .25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice.
SPEC NO: DSAD1427 APPROVED: J. Lu
REV NO: V.3 CHECKED: Joe Lee
DATE: APR/25/2005 DRAWN: S.H.CHEN
PAGE: 1 OF 3 ERP:1331000048
Selection Guide
Part No. Dice Lens Type Iv (ucd) @ 10mA Min. DC10SRWA SUPER BRIGHT RED (GaAIAs) WHITE DIFFUSED 8000 Typ. 31000 10 Segments Bargraph-Display Description
www.DataSheet4U.com
Electrical / Optical Characteristics at TA=25°C
Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Typ. 660 640 20 45 1.85 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V
Absolute Maximum Ratings at TA=25°C
Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Lead Solder Temperature [2]
Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 5mm below package base.
Super Bright Red 100 30 155 5 -40°C To +85°C 260°C For 5 Seconds
Units mW mA mA V
SPEC NO: DSAD1427 APPROVED: J. Lu
REV NO: V.3 CHECKED: Joe Lee
DATE: APR/25/2005 DRAWN: S.H.CHEN
PAGE: 2 OF 3 ERP:1331000048
www.DataSheet4U.com
Super Bright Red
DC10SRWA
Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters.
SPEC NO: DSAD1427 APPROVED: J. Lu
REV NO: V.3 CHECKED: Joe Lee
DATE: APR/25/2005 DRAWN: S.H.CHEN
PAGE: 3 OF 3 ERP:1331000048
.