DDR SDRAM Buffer
Preliminary
PLL103-53
DDR SDRAM Buffer with 5 DDR or 3 SDR/3 DDR DIMMS
FEATURES
Generates 30-output buffers from one i...
Description
Preliminary
PLL103-53
DDR SDRAM Buffer with 5 DDR or 3 SDR/3 DDR DIMMS
FEATURES
Generates 30-output buffers from one input. Supports up to 4 DDR DIMMS or 3 SDR DIMMS and 2 DDR DIMMS. Supports 266MHz DDR SDRAM. One additional output for feedback. Less than 5ns delay. Skew between any outputs is less than 100 ps. www.DataSheet4U.com 2.5V or 3.3V Supply range. Enhanced DDR and SDRAM Output Drive selected by I2C. Available in 56 pin SSOP.
PIN CONFIGURATION
FBOUT VDD3.3_2.5 GND DDR0T_SDRAM10 DDR0C_SDRAM11 DDR1T_SDRAM0 DDR1C_SDRAM1 VDD3.3_2.5 GND DDR2T_SDRAM2 DDR2C_SDRAM3 VDD3.3_2.5 BUF_IN GND DDR3T_SDRAM4 DDR3C_SDRAM5 VDD3.3_2.5 GND DDR4T_SDRAM6 DDR4C_SDRAM7 DDR5T_SDRAM8 DDR5C_SDRAM9 VDD3.3_2.5 SDATA GND VDD2.5 DDR12T DDR12C 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 SEL_DDR VDD2.5 GND DDR11T DDR11C DDR10T DDR10C VDD2.5 GND DDR9T DDR9C VDD2.5 PD# GND DDR8T DDR8C VDD2.5 GND DDR7T DDR7C DDR6T DDR6C GND SCLK VDD2.5 GND DDR13C DDR13T
PLL103-53
Note: #: Active Low
BLOCK DIAGRAM
DESCRIPTIONS
The PLL103-53 is designed as a 3.3V/2.5V buffer to distribute high-speed clocks in PC applications. The device has 30 outputs. These outputs can be configured to support 4 unbuffered DDR (Double Data Rate) DIMMS or to support 3 unbuffered standard SDR (Single Data Rate) DIMMS and 2 DDR DIMMS. The PLL103-53 can be used in conjunction with the PLL202-14/-54 or si...
Similar Datasheet