2911-05-321

2900 Series Reed Relays 2900 Series Reed Relays Ideally suited to the needs of Automated Test Equipment and RF requirements. The specification tables allow you to select the appropriate relay for your particular application. Slightly larger than the 2200 Series; these relays provide maximum versatility with options such as a Form C with electrostatic or co-axial shielding. If your requirements differ, please consult your local representative or Coto’s Factory. www.DataSheet4U.com 2900 Series Features Very small (0.20 in2), high reliability reed relays High Insulation Resistance - 1012 Ω offered on some models High speed switching compared to electromechanical relays Hermetically sealed contacts for long life Epoxy coated steel shell provides magnetic shielding Optional Electrostatic Shield for reducing capacitive coupling Optional Coaxial Shield for 50 Ω impedance and switching of fast rise time digital pulses Dimensions in Inches (Millimeters) Bottom View 2 12 COTO TECHNOLOGY (USA) Tel: (401) 943-2686 / Fax (401) 942-0920 6 (Europe) Tel: +31-45-5439343 / Fax +31-45-5427216 2900 Series Reed Relays www.DataSheet4U.com Top View: Dot stamped on top of relay refers to pin #1 location Grid = .1"x.1" (2.54mm x 2.54mm) Notes: 1 Environmental Ratings: Storage Temp: -35°C to +100°C; Operating Temp: -20°C to +85°C Solder Temp: 270°C max; 10 sec. max The operate and release voltage and the coil resistance are specified at 25°C. These values vary by approximately 0.4% / °C ...