DatasheetsPDF.com

LCD Module. B150PN01 Datasheet

DatasheetsPDF.com

LCD Module. B150PN01 Datasheet






B150PN01 Module. Datasheet pdf. Equivalent




B150PN01 Module. Datasheet pdf. Equivalent





Part

B150PN01

Description

TFT LCD Module

Manufacture

AU

Datasheet
Download B150PN01 Datasheet


AU B150PN01

B150PN01; www.DataSheet4U.com Product Functional Specification 15 inch SXGA+ Color TFT L CD Module Model Name : B150PN01 (u) Pr eliminary Specification ( ) Final Speci fication Note: This Specification is s ubject to change without notice. (C) C opyright AU Optronics, Inc. July, 2001 All Rights Reserved. B150PN01 Ve r.06 1/20 No Reproduction and Redistribution Allowed. I. Cont.


AU B150PN01

ents 1.0 2.0 Handling Precautions Genera l Description 2.1 Characteristics 2.2 F unctional Block Diagram 3.0 www.DataShe et4U.com Absolute Maximum Ratings Opti cal Characteristics Signal Interface 5. 1 Connectors 5.2 Signal Pin 5.3 Signal Description 5.4 Signal Electrical Chara cteristics 5.5 Signal for Lamp Connecto r 4.0 5.0 6.0 7.0 8.0 Pixel Format I mage Parameter Gui.


AU B150PN01

de Line for CFL Inverter Interface Timin gs 8.1 Timing Characteristics 8.2 Timin g Definition 9.0 10.0 11.0 Power Cons umption Power ON/OFF Sequence Mechanica l Characteristics II Record of Revisio n Version and Date 0.1. 2001/1/29 0.2. 2001/4/16 0.3 2001/6/14 0.4 2001/7/6 0. 5 2001/7/13 0.6 2001/8/13 Page All 5 5 5 5 8 Signal connector: JAE FIOld descr iption First Editi.



Part

B150PN01

Description

TFT LCD Module

Manufacture

AU

Datasheet
Download B150PN01 Datasheet




 B150PN01
www.DataSheet4U.com
Product Functional Specification
15 inch SXGA+ Color TFT LCD Module
Model Name : B150PN01
(u) Preliminary Specification
( ) Final Specification
Note: This Specification is subject to change without notice.
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B150PN01 Ve r.06
1/20





 B150PN01
I. Contents
1.0 Handling Precautions
2.0 General Description
2.1 Characteristics
2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings
www.DataSheet44U.0.com Optical Characteristics
5.0 Signal Interface
5.1 Connectors
5.2 Signal Pin
5.3 Signal Description
5.4 Signal Electrical Characteristics
5.5 Signal for Lamp Connector
6.0 Pixel Format Image
7.0 Parameter Guide Line for CFL Inverter
8.0 Interface Timings
8.1 Timing Characteristics
8.2 Timing Definition
9.0 Power Consumption
10.0 Power ON/OFF Sequence
11.0 Mechanical Characteristics
II Record of Revision
Version and Date
0.1. 2001/1/29
0.2. 2001/4/16
0.3 2001/6/14
0.4 2001/7/6
0.5 2001/7/13
0.6 2001/8/13
Page
All
5
5
5
5
8
Old description
First Edition for Customer
Weight 650g max.
Thickness 6.3mm max.
Weight 570g max.
Signal connector: JAE FI-
New Description
Remark
All
Weight 570g max.
Thickness 6.2mm max.
Weight 550g typ.
Power consumption 5.5W
Signal connector: JAE FI-XB30SR- Connector type
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B150PN01 Ve r.06
2/20





 B150PN01
0.6 2001/8/13
SEB20P-HF13
18 Update mechanical drawing
HF11
change from 20
pin to 30 pin.
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
www.DataShee2t4)U.cBome sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth whenhandling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL Reflector edge. Instead,
press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be
damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source(2.11,
IEC60950 or UL1950), or be applied exemption.
(C) Copyright AU Optronics, Inc.
July, 2001 All Rights Reserved.
No Reproduction and Redistribution Allowed.
B150PN01 Ve r.06
3/20



Recommended third-party B150PN01 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)