M61516FP

MITSUBISHI SOUND PROCESSOR ICs M61516FP 7.1ch ELECTRONIC VOLUME WITH 10 INPUT SELECTOR APPLICATION Receiver,AV Amp,Mini Stereo etc. FEATURE FUNCTION FEATURE Electronic Volume (1)8 channel Independent Electronic Volume with High Voltage Transistor. (0~-92dB/1dBstep,-95,- dB) www.DataSheet4U.com (2)Built-in Zero-Crossing Detector Circuit for reduce click noise at changing volume value. Tone Control Input Selector (1)Bass/Treble,0~ 10dB/2dBstep (2)Add a Bypass Mode/Tone Mode changing SW (1)Front L/R channel 10 Input Selector (2)2 sets of multi channel input 4 Lines REC Output (Both L and R channels) 0/-3/-6/-9/-12dB Outline 80P6N-A 0.8mm Pitch QFP (20.0mm x 14.0mm x 2.8mm) OUTLINE REC Output Input attenuator Output Gain Control 0/+3/+6/+9/+12dB Balance Out Loudness *1 Built-in Balance out (for ADC) Built-in Loudness circuit of center tap type in FL/FRch *1 Balance output and loudness function can’t be used at the same time. RECOMMENDED OPERATING CONDITION Supply Voltage Range AVCC=7.0V(typ) , AVEE=-7.0V(typ) , DVDD=5.0V(typ) SYSTEM BLOCK DIAGRAM CLOCK REC OUTL TONE Zero-Cross LATCH DATA Output Gain Control Loudness Tap Input attenuator DVDD AVCC AVEE DGND Loudness Tap u-COM Interface Zero-Cross Output Gain Control TONE 1 2 3 4 5 6 7 8 9 10 Flout TONE Zero-Cross Lch FRout FLchVOL To loudness tap Zero-Cross TONE Loudness /Balance-Output L Zero-Cross Cout SLout Rch 1 2 3 4 5 6 7 8 9 10 Input attenuator Balance+Output L FRchVOL To loudness tap Zero-Cross...