DFP14

DFP Vishay Dale Thick Film Resistor Networks Flat Pack, 11, 12 Schematics FEATURES ∑ 11 and 12 Schematics ∑ 0.065" [1.65mm] height for high density packaging ∑ Low temperature coefficient (- 55°C to + 125°C) ± 100ppm/°C ∑ Hot solder dipped leads ∑ Highly stable thick film ∑ Wide resistance range ∑ All devices are capable of passing the MIL-STD-202, Method 210, Condition C "Resistance to Soldering Heat" test POWER RATING GLOBAL MODEL P25°C ELEMENT W P25°C PACKAGE W CIRCUIT SCHEMATIC 11 12 www.DataSheet4U.com STANDARD ELECTRICAL SPECIFICATIONS LIMITING ELEMENT VOLTAGE MAX. VƆ 75 75 TEMPERATURE1) COEFFICIENT ppm/°C STANDARD2) TOLERANCE % RESISTANCE RANGE W TEMPERATURE COEFFICIENT TRACKING ppm/°C 50 50 0.25 0.65 0.15 0.65 1)Temperature Range: - 55°C to + 125°C Consult factory for stocked values DFP ± 100 2 10 - 1M ± 100 2 10 - 1M 2) ± 1% and ± 5% tolerance available TECHNICAL SPECIFICATIONS 11 Schematic 7 or 8 isolated resistors The DFPxx11 provides the user with 7 or 8 nominally equal resistors with each resistor isolated from all others. Commonly used in the following applications: "Wired OR" Pull-up Long-line Impedance Balancing Power Driven Pull-up LED Current Limiting Power Gate Pull-up ECL Output Pull-down Line Termination TTL Input Pull-down 13 or 15 resistors with one pin common The DFPxx12 provides the user with a choice of 13 or 15 nominally equal resistors, each connected to a common pin (14 or 16). Commonly used in the following application...