DatasheetsPDF.com

Connector. 28FLT-SM1-TB Datasheet

DatasheetsPDF.com

Connector. 28FLT-SM1-TB Datasheet






28FLT-SM1-TB Connector. Datasheet pdf. Equivalent




28FLT-SM1-TB Connector. Datasheet pdf. Equivalent





Part

28FLT-SM1-TB

Description

Connector



Feature


FLT CONNECTOR 0.5mm (.020") pitch Embos s Tape Connectors for FPC Features –––––––––––– –––––––––– • Hea t resistant design suitable for surface mounting The housing is made of heat r esistant plastic to allow reflow solder ing. www.DataSheet4U.com • Staggered surface mount tails The lead pitch is thus 1.0mm (.039"), which enables connector mounting operation easier..
Manufacture

JST

Datasheet
Download 28FLT-SM1-TB Datasheet


JST 28FLT-SM1-TB

28FLT-SM1-TB; • Embossed tape for automatic mounti ng The FLT connector is packaged in emb ossed tape for automatic mounting. The plastic reel can be used repeatedly, go od for eco-system. • FPC insertion i s easy Staggered and unique contact poi nt layout can reduce the FPC insertion force, yet with secure retention force. • Compact design This connector mea sures only 4.15mm (.163".


JST 28FLT-SM1-TB

) high after mounting, with a reduced su rface mounting area, as solder tabs are not necessary because of the staggered solder tail construction. Specificati ons ––––––––––– ––––––– • Current rati ng: 0.5A AC, DC • Voltage rating: 50V AC, DC • Temperature range: -25˚C t o +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial valu.


JST 28FLT-SM1-TB

e/50m Ω max. After environmental testi ng/20m Ω max. (Variance from the init ial) • Insulation resistance: 500M min. • Withstanding voltage: 200V A C/minute • Applicable FPC: Lead pitch /0.5mm (.020") Lead width/0.35mm (.014" ) Mating part thickness/ 0.30 ± 0.05mm (.012"±.002") FPC to be actuall y used should be checked for applicabil ity. * Contact JST if Lead-Free.

Part

28FLT-SM1-TB

Description

Connector



Feature


FLT CONNECTOR 0.5mm (.020") pitch Embos s Tape Connectors for FPC Features –––––––––––– –––––––––– • Hea t resistant design suitable for surface mounting The housing is made of heat r esistant plastic to allow reflow solder ing. www.DataSheet4U.com • Staggered surface mount tails The lead pitch is thus 1.0mm (.039"), which enables connector mounting operation easier..
Manufacture

JST

Datasheet
Download 28FLT-SM1-TB Datasheet




 28FLT-SM1-TB
0.5mm
(.020") pitch
www.DataSheet4U.com
FLT CONNECTOR
Connectors for FPC
Emboss Tape
Features ––––––––––––––––––––––––
• Heat resistant design suitable for surface
mounting
The housing is made of heat resistant plastic to allow reflow
soldering.
• Staggered surface mount tails
The lead pitch is thus 1.0mm (.039"), which enables connector
mounting operation easier.
• Embossed tape for automatic mounting
The FLT connector is packaged in embossed tape for
automatic mounting. The plastic reel can be used repeatedly,
good for eco-system.
• FPC insertion is easy
Staggered and unique contact point layout can reduce the
FPC insertion force, yet with secure retention force.
• Compact design
This connector measures only 4.15mm (.163") high after
mounting, with a reduced surface mounting area, as solder
tabs are not necessary because of the staggered solder tail
construction.
528
Specifications –––––––––––––––––––
• Current rating: 0.5A AC, DC
• Voltage rating: 50V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/50m max.
After environmental testing/20m max.
(Variance from the initial)
• Insulation resistance: 500M min.
• Withstanding voltage: 200V AC/minute
• Applicable FPC: Lead pitch/0.5mm (.020")
Lead width/0.35mm (.014")
Mating part thickness/
0.30 ± 0.05mm (.012"±.002")
<Note>FPC to be actually used should be checked for applicability.
* Contact JST if Lead-Free product is required.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1Certified LR20812




 28FLT-SM1-TB
FLT CONNECTOR
Connector –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Circuit No.1
A
B
www.DataSheet4U.com
0.5(.020)
C
1.0(.039)
2.95(.116)
3.4(.134)
Circuits
6
8
10
12
14
16
18
20
22
24
26
28
30
32
40
Model No.
06FLT-SM1-TB
08FLT-SM1-TB
10FLT-SM1-TB
12FLT-SM1-TB
14FLT-SM1-TB
16FLT-SM1-TB
18FLT-SM1-TB
20FLT-SM1-TB
22FLT-SM1-TB
24FLT-SM1-TB
26FLT-SM1-TB
28FLT-SM1-TB
30FLT-SM1-TB
32FLT-SM1-TB
40FLT-SM1-TB
Dimensions mm(in.)
ABC
4.9(.193)
3.5(.138)
2.5(.098)
5.9(.232)
4.5(.177)
3.5(.138)
6.9(.272)
5.5(.217)
4.5(.177)
7.9(.311)
6.5(.256)
5.5(.217)
8.9(.350)
7.5(.295)
6.5(.256)
9.9(.390)
8.5(.335)
7.5(.295)
10.9(.429)
9.5(.374)
8.5(.335)
11.9(.469) 10.5(.413)
9.5(.374)
12.9(.508) 11.5(.453) 10.5(.413)
13.9(.547) 12.5(.492) 11.5(.453)
14.9(.587) 13.5(.531) 12.5(.492)
15.9(.626) 14.5(.571) 13.5(.531)
16.9(.665) 15.5(.610) 14.5(.571)
17.9(.705) 16.5(.650) 15.5(.610)
21.9(.862) 20.5(.807) 19.5(.768)
Q'ty /
reel
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
Material and Finish
Contact: Phosphor bronze, copper-undercoated, tin/lead-plated
Housing: Nylon 46, UL94V-0
Note: 1. The products listed above are supplied on embossed-tape.
2. 32FLT-SM1-TB and 40FLT-SM1-TB are not CSA approved.
Taping specifications ––––––––––––––––––––––––––––––––––––––––––––––––––––––
Feeding direction
(12 to 30 circuits) W1···25.5mm (1.004")
Feeding direction
1.55±0.05
4.0±0.1 1.1±0.1
(.061±.002)dia. (.157±.004) (.043±.004)
Cover tape
Carrier tape
Carrier tape
[13(.512)dia.]
W1 ( )+2.5 +.098
-1.0 -.039
2.0±0.5(.079±.020)
Feeding direction
Cover tape leader
Leader part
The end part
100(3.937)min.
160(6.299)min. Connector mounting part
400(15.748)min.
(6 to 10 circuits) W1···17.5mm (.689")
Feeding direction
1.55±0.05
4.0±0.1 1.1±0.1
(.061±.002)dia. (.157±.004) (.043±.004)
Cover tape
Carrier tape
8.0±0.1
(.315±.004)
(32 to 40 circuits) W1···33.5mm (1.319")
Feeding direction
1.55±0.05
4.0±0.1 1.1±0.1
(.061±.002)dia. (.157±.004) (.043±.004)
Cover tape
Carrier tape
8.0±0.1
(.315±.004)
Note:
1. Specifications conform to JIS C 0806. The tape width, connector recess hole dimensions,
etc.are determined by the number of circuits and external shape of the connector to be loaded.
2. Specifications are subject to change without prior notice.
8.0±0.1
(.315±.004)
529




 28FLT-SM1-TB
FLT CONNECTOR
Lead section dimensions of FPC ––––––––––––––––––––––––––––––––––––––––––––
www.DataSheet4U.com
[0.5(.020)X(Nomber of circuits+1)]±0.05(.002)
0.5±0.1(.020±.004) [0.5(.020)X(Nomber of circuits-1)]±0.03(.001)
0.5±0.03 0.35±0.04
(.020±.001) (.014±.002)
0.3±0.05
(.012±.002)
Reinforcing layer
PC board layout (viewed from component side) and Assembly layout ––––––––––––––––––
Circuit No.1
1.0±0.05
(.039±.002)
0.5±0.05(.020±.002)
2.95(.116)
0.5(.020)
Note:
1.Tolerances are non-cumulative: ±0.05mm( ±.002") for all centers.
2.The dimensions above should serve as a guide line. Contact JST for details.
530



Recommended third-party 28FLT-SM1-TB Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)