RT2800

DR A FT RT2800 MIMO Wireless Chipset Family 802.11n Solution featuring MIMObility™ Technology – Blazing speed at 300Mbps PHY www.DataSheet4U.com – Robust Connection at Extended Range – Mitigating Dead Spots Overview The Ralink 802.11n Chipset family provides solutions for PCI, PCIe and USB interfaces with both 2.4 and 2.4/5GHz suppport. Each chipset consists of two highly integrated ICs (RFIC and BB/MAC IC) that fully comply with current draft IEEE 802.11n and IEEE 802.11a/b/g standards. Ralink feature-rich chipsets embody 2 transmitter 3 receiver (2T3R) achitecture to ensure reliable, cost-effective wireless connectivity at high throughput over an extended range. Optimized RF architecture and baseband algorithms provide superb performance with low-power consumption. Intelligent MAC design deploys a highly efficient DMA engine and hardware data processing accelerators without overloading the host procesor. All chipsets support standards-based security, quality of service and international regulatory, giving end users the greatest performance anytime, anywhere. MAC/BBP Integrated Chip 300 Mbps PHY Rate Support 2T2R/2T3R Modes Legacy, Mixed and Green Field Modes 20MHz/40MHz Bandwidth Support Reverse Direction Data Flow and Frame Aggregation 802.11i - WEP 64/128, WPA, WPA2 802.11e - WMM, WMM-PS, Wake on Wireless LAN Multiple BSSID Support International Regulatory Compliant - 802.11d Cisco CCX Compliant Bluetooth Co-existence Low Power with advanced...