Document
DG3001/3002/3003
New Product
Vishay Siliconix
Low-Voltage Sub-Ohm SPST/SPDT MICRO FOOTr Analog Switch
FEATURES
D MICRO FOOT Chip Scale Package (1.0 x 1.5 mm) D Low Voltage Operation (1.8 V to 5.5 V) D Low On-Resistance - rDS(on): 0.4 W D Fast Switching - tON : 47 ns, tOFF: 40 ns D Low Power Consumption www.DataSheet4U.com D TTL/CMOS Compatible
BENEFITS
D D D D Reduced Power Consumption Simple Logic Interface High Accuracy Reduce Board Space
APPLICATIONS
D D D D D D Cellular Phones Communication Systems Portable Test Equipment Battery Operated Systems PCM Cards PDA
DESCRIPTION
The DG3001/DG3002/DG3003 are monolithic CMOS analog switches designed for high performance switching of analog signals. The DG3001 and DG3002 are configured as SPST switches, and the DG3003 is an SPDT switch. Combining low power, high speed (tON: 47 ns, tOFF: 40 ns), low on-resistance (rDS(on): 0.4 W) and small physical size (MICRO FOOT, 6-bump), the DG3001/DG3002/DG3003 are ideal for portable and battery powered applications requiring high performance and efficient use of board space. The DG3001/DG3002/DG3003 are built on Vishay Siliconix’s low voltage JI2 process. An epitaxial layer prevents latchup. Each switch conducts equally well in both directions when on, and blocks up to the power supply level when off.
FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION
MICRO FOOT (6-Bump) DG3001DB
V+ IN GND
B1 B2 B3 A1 A2 A3
MICRO FOOT (6-Bump) DG3002DB
NO (Source1) COM COM V+ IN GND
B1 B2 B3 A1 A2 A3
MICRO FOOT (6-Bump) DG3003DB
NC (Source1) COM COM V+ IN GND
B1 B2 B3 A1 A2 A3
NO (Source1) COM NC (Source2)
Top View
Top View
Top View
A1 Locator
A1 Locator
A1 Locator
XXX 3003
XXX 3002
Device Marking: 3001 xxx = Date/Lot Traceability Code
XXX 3001
Device Marking: 3002 xxx = Date/Lot Traceability Code
Device Marking: 3003 xxx = Date/Lot Traceability Code
TRUTH TABLE
Logic
0 1
ORDERING INFORMATION
NO
OFF ON -40 to 85°C
NC
ON OFF
Temp Range
Package
MICRO FOOT: 6-Bump (3 2, 0.5-mm pitch, 165 mm nom. 165nom bump height)
Part Number
DG3001DB DG3002DB DG3003DB
Document Number: 72505 S-32069—Rev. A, 27-Oct-03
www.vishay.com
1
DG3001/3002/3003
Vishay Siliconix
ABSOLUTE MAXIMUM RATINGS
Reference to GND V+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to +6 V IN, COM, NC, NOa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to (V+ + 0.3 V) Continuous Current (NO, NC, COM) . . . . . . . . . . . . . . . . . . . . . . . . "250 mA Peak Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . "400 mA (Pulsed at 1 ms, 10% duty cycle) Storage Temperature (D Suffix) . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to 150°C Package Reflow Conditionsb VPR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215°C IR/Convection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220°C Power Dissipation (Packages)c 6-Bump, 2 x 3 MICRO FOOTd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mW Notes: a Signals on NC, NO, or COM or IN exceeding V+ will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b Refer to IPC/JEDEC (J-STD-020A) c All bumps soldered to PC Board. d Derate 3.1 mW/_C above 70_C
New Product
www.DataSheet4U.com
SPECIFICATIONS (V+ = 3.0 V)
Test Conditions Otherwise Unless Specified Parameter Analog Switch
Analog Signal Ranged On-Resistanced rON Flatnessd rON Matchd Switch Off Leakage Current f VNO, VNC, VCOM rON rON Flatness DrON INO(off), INC(off) ICOM(off) Channel-On Leakage Currentf ICOM(on) V+ = 3.3 V VNO, VNC = 0.3 V/3 V, VCOM = 3 V/0.3 V V+ = 3.3 V, VNO, VNC = VCOM = 0.3 V/3 V V+ = 2.7 V, VCOM = 1.5 V, INO, INC = 10 mA V+ = 2.7 V, VCOM = 0 to V+, INO, INC = 10 mA Full Room Full Room Room Room Full Room Full Room Full 1 −10 1 −10 1 −10 0 0.4 0.1 0.01 V+ 0.7 0.8 0.2 0.05 1 10 1 10 1 10 nA W V
Limits
−40 to 85_C
Symbol
V+ = 3 V, "10%, VIN = 0.4 or 2.0 Ve
Tempa
Minb
Typc
Maxb
Unit
Digital Control
Input High Voltage Input Low Voltage Input Capacitanced Input Currentd
VINH
Full Full Full VIN = 0 or V+ Full
2 0.4 5 −1 1
VINL
Cin
V pF mA
IINL or IINH
Dynamic Characteristics
Turn-On Timed Turn-Off Timed Break-Before-Make Timed Charge Injectiond Off-Isolationd Crosstalkd NO, NC Off Capacitanced Channel-On Capacitanced tON tOFF td QINJ OIRR XTALK CNO(off), CNC(off) CON CL = 1 nF, VGEN = 0 V, RGEN = 0 W, Figure 3 RL = 50 W, CL = 5 pF, pF f = 100 kHz VIN = 0 or V+, f = 1 MHz VNO or VNC = 2 2.0 0V V, RL = 300 W, CL = 35 pF Figure 1 and 2 Room Full Room Full Room Room Room Room Room Room 1 47 40 6 64 −70 −70 100 340 pC dB 71 59 ns
pF
Power Supply
Power Supply Range Power Supply Currentd V+ I+ VIN = 0 or V+ 2.7 0.1 3.3 1.0 V mA
Notes: a. Room = 25°C, Full = as determined by the operating suffix. b. The algebraic conv.