Document
www.DataSheet4U.com
Company Profile
www.DataSheet4U.com
Quadrax Technology
Technical Features and Benefits
An optimized high speed copper contact
Size 8 outer contact with 4 strategically spaced size 24 inner contacts
www.DataSheet4U.com Equivalent
forming two 1 00 or 150Ω matched impedance with excellent 360° shielding, to two twinax contacts with: - better performances (reduced cross talk), - shorter cabling time, + = - compact profile, - lighter weight. One contact completes a full duplex 100 Mbps ethernet link, and fulfills the ISO/IEC 1 1801 categorie 6 requirements
Fit the major harsh environment mil-aero connectors:
Arinc 600 MIL-DTL-38999 EN2997 EN3646
A versatile technology
Ground connection of the cable braid to the connector shell on :
- All Arinc 600 layouts - MIL-DTL-38999 - EN2997 layouts 08-01 & 28-06
2 designs for 2 standards:
A standardized technology
- Protruding alignment key for Arinc 600, EN2997, EN3646
Protruding alignment key
- In line alignment key for MIL-DTL-38999
In-line alignment key
664 C N ARI pliant com
n ropea u e g ct oin On g ard proje d stan
Quadrax Contact
Technical characteristics
Electrical
• ISO/IEC 1 1 801 category 6 compliant: - Next (cross talk): > 46 dB at 250 MHz - Return loss: > 16dB at 250 MHz - Shield effectiveness: > 36dB at 80 MHz
Electrical (continue)
• Dielectric withstanding voltage: Altitude Sea level 21 000 m Service I 500 Vrms 1 25 Vrms
Mechanical
• Operating temperature: -65°C + 200°C, • Inner contact: copper alloy • Body: copper alloy • Insulator: thermoplastic • Contact plating: gold over nickel
www.DataSheet4U.com
• Contact to shell continuity: < 10 mΩ (ARINC 600) • Contact resistance (low level): - initial 1 5 mΩ, - after tests 30 mΩ,
• Insulation resistance: at ambient temperature: > 5000 mΩ at high temperature: > 1000 mΩ • #24 contact cable size acceptance: AWG 22 to AWG 26
Return loss (dB)
Next (dB)
90 85 80 75 70 65 60 55 50 45 40 1 10 frequency (MHz) Frequency (MHz) 100 1000 Cat Ethernet 100 Mb/s
0 0
Shield effectiveness (dB)
110 100 0 0 0 0
QUADRAX Cat Ethernet 100 Mb/s Cat Cat
QUADRAX
Cat QUADRAX
1
0 0 Cat & Ethernet 100 Mb/s Cat
10 1 10 frequency (MHz) Frequency (MHz) 100 1000
0 1 10 100 1000 frequency (MHz) Frequency (MHz)
Ordering information
ARINC 600, EN2997, EN3646 contacts
Protruding alignment key.
View Contact type Male Female Male Male Male Female Sealing Unsealed Unsealed Unsealed Unsealed Unsealed Unsealed T° Max 200°C 200°C 200°C 200°C 260°C 260°C Impedance 100Ω 100Ω 100Ω 100Ω 100Ω 100Ω Release Rear Rear Front Front Rear Rear Version Crimp Crimp PC tail L= 6.35 mm Tinned PC tail L= 6.35 mm Crimp Crimp SOURIAU part number ETH1-1 100A ETH1-1 101A ETH1-1 1 10A ETH1-1 1 23A ETH1-1 1 26A ETH1-1 1 27A ABS part number ABS0973 M08A ABS0974 F08A -
Sealing boot / Sealing plug
View Type Connector EN2997 Sealing boot EN2997 Arinc 600 Sealing plug EN2997 Temperature 200°C 260°C 200°C 260°C SOURIAU Part number 8533 8236 8533 8307 8660 6053 8533 8330
Quadrax Contact
38999 series I & 3 contacts
In line alignment key. All contacts are delivered with a sealing boot.
View Contact type Male Female
www.DataSheet4U.com
Sealing Sealed Sealed Sealed Sealed Sealed Sealed Sealed Sealed
Impedance 100Ω 100Ω 100Ω 100Ω 1 50Ω 1 50Ω 1 50Ω 1 50Ω
Release Rear Rear Rear Rear Rear Rear Rear Rear
Version Crimp Crimp PC tail PC tail PC tail PC tail Crimp Crimp
SOURIAU part number ETH1-1 235A ETH1-1 236A ETH1-1 237A ETH1-1 238A ETH1-1 501A ETH1-1 502A ETH1-1 503A ETH1-1 504A
Male Female Male Female Male Female
Quadrax tools
• Outer body: M22520/5-01 crimping tool and M22520/5-45 die set rep B, die set crimping tool • Signal contact: M22520/201 crimping tool and K709 positioner,
crimping tool & positioner • Insertion/extraction tool (standard size 8 cavity tools): 8660-197 (metallic) or M81969/8-1 4 (plastic)
8660-197
M81969/8-1 4
Recommanded cable
Charactristic impedance 100 Reference ABS 1 503 KD23 Cable type Star quad Number of pairs 2
ARINC 600 with Quadrax Contact
Mechanical
ARINC 600 shell: alodine or nickel plated, ARINC 600 insulator: thermoplastic, thermoset or metal, Clip #8: copper alloy, gold over nickel plated, Quadrax contact retention: 1 55N min, Quadrax contact insertion force: 1 1N max, Contact to shell conductivity <10mΩ, Protruding alignment key, Crimp and PC tail versions, www.DataSheet4U.com Fiber optic upgrade possible with Elio 8 adaptor and Elio fiber optic contact.
Layouts
Cavitiy A, B, D, E of ARINC 600 size 2 and 3
I - Q1 1*
I - Q1 0*
I-1 1 8Q2
Cavitiy C,F of ARINC 600 size 2 and 3
II - Q6* * Grounded metal insert
II - 68Q2
II - 1 1Q2
II - 62Q2
II - 20Q4
Contact layouts
#8 «Quadrax» type cavities are compatible with all standard #8 coaxial, triaxial, ELIO 8 and Quadrax contacts.
Insert name I-Q1 1 I-Q10 I-1 18Q2 II-Q6 II-68Q2 II-1 1Q2 II-62Q2 II-20Q4 ARINC 600 Cavity A, B, D, E A, B, D, E A.