Document
FUJITSU SEMICONDUCTOR DATA SHEET
DS07-12614-2E
8-bit Proprietary Microcontrollers
CMOS
F2MC-8FX MB95100AM Series
www.DataSheet4U.com
MB95108AM/F104AMS/F104ANS/F104AJS/F106AMS/F106ANS/F106AJS/ MB95F108AMS/F108ANS/F108AJS/F104AMW/F104ANW/F104AJW/F106AMW/ MB95F106ANW/F106AJW/F108AMW/F108ANW/F108AJW/FV100D-103
■ DESCRIPTION
The MB95100AM series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions. Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURE
• F2MC-8FX CPU core Instruction set optimized for controllers • Multiplication and division instructions • 16-bit arithmetic operations • Bit test branch instruction • Bit manipulation instructions etc. • Clock • Main clock • Main PLL clock • Sub clock (for dual clock product) • Sub PLL clock (for dual clock product) (Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development.
Copyright©2006 FUJITSU LIMITED All rights reserved
MB95100AM Series
(Continued) • Timer • 8/16-bit compound timer × 2 channels • 16-bit reload timer • 8/16-bit PPG × 2 channels • 16-bit PPG × 2 channels • Timebase timer • Watch prescaler (for dual clock product) • LIN-UART • Full duplex double buffer • Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable www.DataSheet4U.com • UART/SIO • Full duplex double buffer • Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable • I2C* Built-in wake-up function • External interrupt • Interrupt by edge detection (rising, falling, or both edges can be selected) • Can be used to recover from low-power consumption (standby) modes. • 8/10-bit A/D converter • 8-bit or 10-bit resolution can be selected • Low-power consumption (standby) mode • Stop mode • Sleep mode • Watch mode (for dual clock product) • Timebase timer mode • I/O ports : • The number of maximum ports • Single clock product : 54 ports • Dual clock product : 52 ports • Port configuration • General-purpose I/O ports (N-ch open drain) : 6 ports • General-purpose I/O ports (CMOS) : Single clock product : 48 ports Dual clock product : 46 ports • Programmable input voltage levels of port Automotive input level / CMOS input level / hysteresis input level • Flash memory security function Protects the content of Flash memory (Flash memory device only) * : Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use, these components in an I2C system provided that the system conforms to the I2C Standard Specification as defined by Philips.
2
MB95100AM Series
■ MEMORY LINEUP
Flash MB95F104AMS/F104ANS/F104AJS MB95F104AMW/F104ANW/F104.