Document
FUJITSU MICROELECTRONICS DATA SHEET
DS07-12611-4Ea
8-bit Microcontrollers
CMOS
F2MC-8FX MB95110M series
www.DataSheet4U.com
MB95117M/F114MS/F114NS/F114JS/F116MS/F116NS/F116JS/ MB95F118MS/F118NS/F118JS/F114MW/F114NW/F114JW/ MB95F116MW/F116NW/F116JW/F118MW/F118NW/F118JW/FV100D-103
■ DESCRIPTION
The MB95110M series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions.
Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURES
• F2MC-8FX CPU core Instruction set optimized for controllers • Multiplication and division instructions • 16-bit arithmetic operations • Bit test branch instruction • Bit manipulation instructions etc. • Clock • Main clock • Main PLL clock • Sub clock (for dual clock product) • Sub PLL clock (for dual clock product) (Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page URL : http://edevice.fujitsu.com/micom/en-support/ “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development.
Copyright©2006-2008 FUJITSU MICROELECTRONICS LIMITED All rights reserved 2007.11
MB95110M Series
(Continued) • Timer • 8/16-bit compound timer × 2 channels Can be used to interval timer, PWC timer, PWM timer and input capture. • 8/16-bit PPG × 2 channels • 16-bit PPG × 1 channel • Time-base timer × 1 channel • Watch prescaler (for dual clock product) × 1 channel • LIN-UART × 1 channel • LIN function, clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable • Full duplex double buffer www.DataSheet4U.com • UART/SIO × 1 channel • Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable • Full duplex double buffer 2 • I C* × 1 channel Built-in wake-up function • External interrupt × 8 channels • Interrupt by edge detection (rising, falling, or both edges can be selected) • Can be used to recover from low-power consumption (standby) modes. • 8/10-bit A/D converter × 8 channels 8-bit or 10-bit resolution can be selected • Low-power consumption (standby) mode • Stop mode • Sleep mode • Watch mode (for dual clock product) • Time-base timer mode • I/O port • The number of maximum ports - Single clock product : 39 ports - Dual clock product : 37 ports • Configuration - General-purpose I/O ports (N-ch open drain) : 2 ports - General-purpose I/O ports (CMOS) : Single clock product : 37 ports Dual clock product : 35 ports • Programmable input voltage levels of port Automotive input level / CMOS input level / hysteresis input level • Dual operation Flash memory Erase/Write and read can be executed in the different bank (Upper Bank/Lower Bank) at the same time. • Flash memory security function Protects the content of Flash memory (Flash memory device only) * : Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Righ.