Document
FUJITSU SEMICONDUCTOR DATA SHEET
DS07-12609-3E
8-bit Microcontroller
CMOS
F2MC-8FX MB95160M Series
www.DataSheet4U.com
MB95F168M/F168N/F168J/FV100D-103
■ DESCRIPTION
The MB95160M series is general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the microcontrollers contain a variety of peripheral functions. Note : F2MC is the abbreviation of FUJITSU Flexible Microcontroller.
■ FEATURE
• F2MC-8FX CPU core Instruction set optimized for controllers • Multiplication and division instructions • 16-bit arithmetic operations • Bit test branch instruction • Bit manipulation instructions etc. • Clock • Main clock • Main PLL clock • Sub clock • Sub PLL clock (Continued)
Be sure to refer to the “Check Sheet” for the latest cautions on development.
“Check Sheet” is seen at the following support page URL : http://www.fujitsu.com/global/services/microelectronics/product/micom/support/index.html “Check Sheet” lists the minimal requirement items to be checked to prevent problems beforehand in system development.
Copyright©2007 FUJITSU LIMITED All rights reserved
MB95160M Series
(Continued) • Timer • 8/16-bit compound timer × 2 channels Can be used to interval timer, PWC timer, PWM timer and input capture. • 8/16-bit PPG × 2 channels • 16-bit PPG × 1 channel • Time-base timer × 1 channel • Watch prescaler × 1 channel • LIN-UART × 1 channel • LIN function, clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable • Full duplex double buffer www.DataSheet4U.com • UART/SIO × 1 channel • Clock asynchronous (UART) or clock synchronous (SIO) serial data transfer capable • Full duplex double buffer • I2C* × 1 channel Built-in wake-up function • External interrupt × 8 channels • Interrupt by edge detection (rising, falling, or both edges can be selected) • Can be used to recover from low-power consumption (standby) modes. • 8/10-bit A/D converter × 8 channels 8-bit or 10-bit resolution can be selected. • LCD controller (LCDC) • 32 SEG × 4 COM (Max 128 pixels) • With blinking function • Low-power consumption (standby) mode • Stop mode • Sleep mode • Watch mode • Time-base timer mode • I/O port • The number of maximum ports : Max 53 • Port configuration - General-purpose I/O ports (N-ch open drain) : 2 ports - General-purpose I/O ports (CMOS) : 51 ports • Programmable input voltage levels of port Automotive input level / CMOS input level / hysteresis input level • Flash memory security function Protects the content of Flash memory * : Purchase of Fujitsu I2C components conveys a license under the Philips I2C Patent Rights to use, these components in an I2C system provided that the system conforms to the I2C Standard Specification as defined by Philips.
2
MB95160M Series
■ PRODUCT LINEUP
Part number*1 Parameter Type ROM capacity RAM capacity Reset output
www.DataSheet4U.com
MB95F168M
MB95F168N Flash memory product 60 Kbytes 2 Kbytes Yes Dual clock
MB95F168J
No
Option*2
Clock system Low voltage detectio.