DatasheetsPDF.com

HCPL-M453 Dataheets PDF



Part Number HCPL-M453
Manufacturers Agilent
Logo Agilent
Description (HCPL-M452 / HCPL-M453) High Speed Optocouplers
Datasheet HCPL-M453 DatasheetHCPL-M453 Datasheet (PDF)

Small Outline, 5 Lead, High Speed Optocouplers Technical Data www.DataSheet4U.com HCPL-M452 HCPL-M453 Features • Surface Mountable • Very Small, Low Profile JEDEC Registered Package Outline • Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes • Very High Common Mode Transient Immunity: 15000 V/µ s at VCM = 1500 V Guaranteed (HCPL-M453) • High Speed: 1 Mb/s • TTL Compatible • Guaranteed AC and DC Performance over Temperature: 0°C to 70°C • Open Collector Output • Recognize.

  HCPL-M453   HCPL-M453



Document
Small Outline, 5 Lead, High Speed Optocouplers Technical Data www.DataSheet4U.com HCPL-M452 HCPL-M453 Features • Surface Mountable • Very Small, Low Profile JEDEC Registered Package Outline • Compatible with Infrared Vapor Phase Reflow and Wave Soldering Processes • Very High Common Mode Transient Immunity: 15000 V/µ s at VCM = 1500 V Guaranteed (HCPL-M453) • High Speed: 1 Mb/s • TTL Compatible • Guaranteed AC and DC Performance over Temperature: 0°C to 70°C • Open Collector Output • Recognized Under the Component Program of U.L. (File No. E55361) for Dielectric Withstand Proof Test Voltage of 3750 Vac, 1 Minute • Lead Free Option Description These small outline high CMR, high speed, diode-transistor optocouplers are single channel devices in a five lead miniature footprint. They are electrically equivalent to the following Agilent optocouplers: SO-5 Package HCPL-M452 HCPL-M453 Standard DIP HCPL-4502 HCPL-4503 SO-8 Package HCPL-0452 HCPL-0453 (Note: These devices equivalent to 6N135/6N136 devices but without the base lead.) The SO-5 JEDEC registered (MO-155) package outline does not require “through holes” in a PCB. This package occupies approximately one-fourth the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes. These diode-transistor optocouplers use an insulating layer between the light emitting diode and an integrated photon detector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output transistor collector increase the speed up to a hundred times CAUTION: The small device geometries inherent to the design of this bipolar component increase the component's susceptibility to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. 2 over that of a conventional photo-transistor coupler by reducing the base-collector capacitance. The HCPL-M452 is designed for high speed TTL/TTL applica- tions. A standard 16 mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6 kΩ pull-up resistor. CTR of the HCPL-M452 is 19% minimum at IF = 16 mA. The HCPL-M453 is an HCPLM452 with increased common mode transient immunity of 15,000 V/µ s minimum at VCM = 1500 V guaranteed. Outline Drawing (JEDEC MO-155) www.DataSheet4U.com Schematic ICC 6 VCC ANODE 1 4.4 ± 0.1 (0.173 ± 0.004) 6 VCC + ANODE 1 VF IF MXXX XXX 7.0 ± 0.2 (0.276 ± 0.008) CATHODE 3 5 VOUT 4 GND CATHODE – 3 SHIELD IO 5 VO 4 GND 0.4 ± 0.05 (0.016 ± 0.002) 3.6 ± 0.1* (0.142 ± 0.004) 0.102 ± 0.102 (0.004 ± 0.004) 0.15 ± 0.025 (0.006 ± 0.001) 7° MAX. 1.27 BSC (0.050) 0.71 MIN. (0.028) MAX. LEAD COPLANARITY = 0.102 (0.004) DIMENSIONS IN MILLIMETERS (INCHES) * MAXIMUM MOLD FLASH ON EACH SIDE IS 0.15 mm (0.006) NOTE: FLOATING LEAD PROTRUSION .


HCPL-M452 HCPL-M453 AF60N03


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)