Dual Element Detector
Lighting
|
Imaging
|
Telecom
Pyroelectric Infrared Detectors
Dual Element Detector
Dual Element Detector Special F...
Description
Lighting
|
Imaging
|
Telecom
Pyroelectric Infrared Detectors
Dual Element Detector
Dual Element Detector Special Flat Pack Housing
Designed for Multi-Sensor Arrangements
The LHi 333 pyroelectric infrared-detector series is specially designed for Light switching applications with many detectors working in parallel for a wide field of view. It includes a dual element pyroelectric ceramic element with FET in source follower connection. This detector is fit with an infrared filter 5...14 µm. It offers high responsivity with excellent common mode performance (match) and low noise.
p
LHi 333
D A T A S H E E T
Parameters
LHi 333
min typical ma x units
2
condition
Field of View
Element size R esponsivity Match Noise Offset Voltage
2x1 3 300 3800 1 20 0,2 10 50 1,55
mm
(2 elements) 100°C, 1 Hz
V /W % µV pp V
25°C , 0,3...10Hz RS =47kW , 25°C
Right for modification reserved / WS /, 29.6.2001
NEP D* Output Impedance Operating Voltage
7,5x10-10 28x10-10 5x10
7
W Ö Hz
1Hz Bw, 100°C, 1 Hz
19x10 5
7
cm Ö Hz/W 1Hz Bw, 100°C, 1 Hz 10 15 kW V RS =47kW , 25°C RS =47kW , 25°C unobstructed unobstructed 75 80 °C °C non permanent non permanent
2 100° 100°
Field of View, horizontal vertical
-40 Operating Temperature
S torage Temperature -40
100
10 R [kV/W] 1 0,1 0,01
0,1 f [H z]
1
10
Dimensions in mm
Frequency Response Europe: PerkinElmer Optoelectronics GmbH Wenzel Jaksch Str 31 Wiesbaden / Germany Phone +49(0)611 492 0 Fax +49(0)611 492 170 USA: PerkinElmer Op...
Similar Datasheet