TP337

Thermopile Infrared Sensor
Features TP337 The thermopile sensor consists of a series of 116 thermoelements, forming a sensitive region size of 545m (diameter). The sensor is hermetically sealed into a TO-5 metal housing, with an optical filter. This standard filter allows measurements to be made in the spectral range above 5 m wavelength. The thermosensor exhibits an almost white noise, comparable to an ohmic resistance. It has a constant signal versus frequency up to its frequency limit, and is directly proportional to incident radiation. The thermopile sensors are featured with an additional temperature reference resistor on the same chip. The standard version of temperature reference www.DataSheet4U.com resistor is housing connected to ground.
Applications * Ear thermometers; clinic thermometers * Infrared thermometers * Consumer applications: hair dryer, micro-wave oven, air conditioner, refrigerator * Continuous temperature control of manufacturing * Security system * Radiation monitor switch system * Absorbing measurement for gas analysis * Thermoelectric converter * Heat flux flowmeter Thermopile Infrared Sensor
Electrical Characteristics TP337 Parameter Thermopile Number of thermojunctions Chip size www.DataSheet4U.com Condition Min. Typ. Max. Unit ----Interference layer Siliconsubstrate 25 With 5-14
m filter --- 116 1740*1740 Diameter 545 625 60 85 1.3*108 16 31 0.36 --- ------
m2
m Active region size Thickness of substrate Resistance of the...