M366S0823CTL

M366S0823CTL M366S0823CTL SDRAM DIMM PC66 Unbuffered DIMM 8Mx64 SDRAM DIMM based on 8Mx8, 4Banks, 4K Refresh, 3.3V Synchronous DRAMs with SPD GENERAL DESCRIPTION The Samsung M366S0823CTL is a 8M bit x 64 Synchronous Dynamic RAM high density memory module. The Samsung M366S0823CTL consists of eight CMOS 8M x 8 bit with 4banks Synchronous DRAMs in TSOP-II 400mil package and a 2K EEPROM in 8-pin TSSOP package on a 168-pin glass-epoxy substrate. Two 0.33uF decoupling capacitors are mounted on www.DataSheet4U.com the printed circuit board in parallel for each SDRAM. The M366S0823CTL is a Dual In-line Memory Module and is intended for mounting into 168-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. I/O transactions are possible on every clock cycle. Range of operating frequencies, programmable latencies allows the same device to be useful for a variety of high bandwidth, high performance memory system applications. FEATURE Performance range Part No. M366S0823CTL-C10 Max Freq. (Speed) 66MHz (@ CL=2 & CL=3) Burst mode operation Auto & self refresh capability (4096 Cycles / 64ms) LVTTL compatible inputs and outputs Single 3.3V ± 0.3V power supply MRS cycle with address key programs Latency (Access from column address) Burst length (1, 2, 4, 8 & Full page) Data scramble (Sequential & Interleave) All inputs are sampled at the positive going edge of the system clock Serial presence detect with EEPROM PCB : H...