LHR5001-2

LHR, LGR 4/5000 Series 10...30 Watt AC-DC Converters Input voltage ranges 85...265 V AC 88…168 V DC 1 or 2 outputs up to 48 V DC 4300 V DC I/O electric strength test voltage LGA Class II equipment (double insulation) Short circuit protection Compact, low cost solution Selection chart Output 1 Uo nom Io nom [V DC] [A] 3.3 3 3.3 7 5 2 5 5 12 1.2 12 2.5 15 1 15 2 24 0.6 24 1.25 3.3 1.5 3.3 2.5 +5 1.25 +5 2.5 +5 1 +5 2.5 +12 0.6 +12 1.25 +15 0.5 +15 1.0 +24 0.3 +24 0.625 Output 2 Uo nom Io nom [V DC] [A] +5 1 +5 2.5 -5 1.25 -5 2.5 +12 0.5 +12 1.25 -12 0.6 -12 1.25 -15 0.5 -15 1.0 -24 0.3 -24 0.625 Input voltage Ui Rated power TA = 50 °C Po tot [W] 10 23 10 25 14.4 30 15 30 14.4 30 10 20.8 12.5 25 11 27.5 14.4 30 15 30 15 30 Type 85…264 V AC (47…63 Hz) 88…168 V DC LHR 4101-2 LGR 4101-2 LHR 4001-2 LGR 4001-2 LHR 4301-2 LGR 4301-2 LHR 4501-2 LGR 4501-2 LHR 4601-2 LGR 4601-2 LHR 5101-2 LGR 5101-2 LHR 5001-2 LGR 5001-2 LHR 5020-2 LGR 5020-2 LHR 5320-2 LGR 5320-2 LHR 5540-2 LGR 5540-2 LHR 5660-2 LGR 5660-2 www.power-one.com Edition 5/07.2001 1 Board Mountable Input Input voltage Input frequency continuous range LHR, LGR 4/5000 Series 85...264 V AC / 88…168 V DC 47...63 Hz Output Efficiency Output voltage switching noise Line and load regulation Uo1 Line and load regulation Uo2 Minimum load Hold-up time 230 V AC, Io nom Ui nom, Io nom, 20 MHz bandwidth, peak-peak Ui min…Ui max, (10…100%) Io nom Ui min…Ui max, (10…100%) Io nom not required on single output types recom...