MX25L1602

MX25L1602 16M-BIT [16M x 1] CMOS SERIAL FLASH EEPROM FEATURES GENERAL 16,777,216 x 1 bit structure 256 Equal Sectors with 8K-byte each - Any sector can be erased 4096 Equal Segments with 512-byte each - Provides sequential output within any segment Single Power Supply Operation www.DataSheet4U.com - 3.0 to 3.6 volt for read, erase, and program operations Latch-up protected to 100mA from -1V to Vcc +1V Low Vcc write inhibit is equal to or less than 2.5V PERFORMANCE SOFTWARE FEATURES Input Data Format - 1-byte Command code, 3-byte address, 1-byte byte address 512-byte Sequential Read Operation Built in 9-bit (A0 to A8) pre-settable address counter to support the 512-byte sequential read operation Auto Erase and Auto Program Algorithm - Automatically erases and verifies data at selected sector - Automatically programs and verifies data at selected page by an internal algroithm that automatically times the program pulse widths (Any page to be programed should have page in the erased state first) Status Register Feature - Provides detection of program and erase operation completion. - Provides auto erase/ program error report HARDWARE FEATURES SCLK Input - Serial clock input SI Input - Serial Data Input SO Output - Serial Data Output PACKAGE - 28-pin SOP (330mil) High Performance - Fast access time: 20MHz serial clock (50pF + 1TTL Load) - Fast program time: 5ms/page (typical, 128-byte per page) - Fast erase time: 300ms/sector (typical, 8K-byte per...