S9703-10

PHOTO IC Photo IC for laser beam synchronous detection S9703-10/-11 High sensitivity, high-speed response S9703 series photo IC uses a high-speed PIN photodiode designed for laser beam synchronous detection. When compared to S9703 and S9703-01 previously marketed, S9703-10 and S9703-11 have reduced their reflection effects in the package. Two types of current amplifiers are available with a gain of 6 times (S9703-11) and 20 times (S9703-10) that can be selected according to laser power to be used. Tape-and-reel shipment is available (S9703-30 and S9703-31). HAMAMATSU also provides S9684 series photo ICs that use a dualelement Si PIN photodiode. www.DataSheet4U.com Features Current amplifier gain: 20 times (S9703-10) 6 times (S9703-11) l Digital output l Small package l Suitable for lead-free solder reflow l Active area: 2.84 × 0.5 mm Applications l High sensitivity l Print start timing detection for laser printers, digital copiers, fax machines, etc. s Absolute maximum ratings (Ta=25 °C, unless otherwise noted) Parameter Symbol Supply voltage Vcc Power dissipation *1 P Output voltage *2 Vo Output current Io Ro terminal current IRO Operating temperature Topr Storage temperature Tstg *1: Power dissipation decreases at a rate of 4 mW/°C above Ta=25 °C. *2: Vcc=+0.5 V or less Value -0.5 to +7 300 -0.5 to +7 5 3 -25 to +80 -40 to +85 Unit V mW V mA mA °C °C s Electrical and optical characteristics (Ta=25 °C, λ=780 nm, Vcc=5 V, Ro=5.1 kΩ, unless otherwise noted) Parameter S...