LOW VOLTAGE CMOS 16-BIT D-TYPE FLIP-FLOP
74LCX16374
LOW VOLTAGE CMOS 16-BIT D-TYPE FLIP-FLOP (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS
5V TOLERANT INPUTS AND...
Description
74LCX16374
LOW VOLTAGE CMOS 16-BIT D-TYPE FLIP-FLOP (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS
5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED : fMAX = 150MHz (MIN.) at VCC = 3V www.DataSheet4U.com s POWER DOWN PROTECTION ON INPUTS AND OUTPUTS s SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24mA (MIN) at VCC = 3V s PCI BUS LEVELS GUARANTEED AT 24 mA s BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL s OPERATING VOLTAGE RANGE: VCC(OPR) = 2.0V to 3.6V (1.5V Data Retention) s PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 16374 s LATCH-UP PERFORMANCE EXCEEDS 500mA (JESD 17) s ESD PERFORMANCE: HBM > 2000V (MIL STD 883 method 3015); MM > 200V
s s
TSSOP
ORDER CODES
PACKAGE TSSOP TUBE T&R 74LCX16374TTR
PIN CONNECTION
DESCRIPTION The 74LCX16374 is a low voltage CMOS 16 BIT D-TYPE FLIP-FLOP with 3 STATE OUTPUTS NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for both inputs and outputs. These 16 bit D-TYPE flip-flops are controlled by two clock inputs (nCK) and two output enable inputs(nOE). On the positive transition of the (nCK), the nQ outputs will be set to the logic state that were setup at the nD inputs. While the (nOE) input is low, the 8 outputs (nQ) will be in a normal state (high or low logic level) and while high level the outputs will be in a high impedance state. Any output control does not affect the internal operation of flip...
Similar Datasheet